M4519 Datasheet, PDF (1/3 Pages) PETERMANN-TECHNIK – HIGH RELIABILITY FOR LOW COST

FEATURES
- HIGH RELIABILITY FOR LOW COST
- AVAILABLE AS TCXO AND VCTCXO
- TEMPERATURE STABILITY OF +-1 PPM AVAILABLE
- EXCELLENT PHASE NOISE PERFORMANCE
- LOW POWER CONSUMPTION
- EXTENDED TEMPERATURE RANGE TO -40/+85°C AVAILABLE
PETERMANN
TECHNIK
Time & Frequency Components
SERIES
M4519
PACKAGE
SMD-PACKAGE 21.3 x 11.7 x 4.7 mm
FREQUENCY RANGE
HCMOS / TTL
CLIPPED SINE WAVE
2.0 ~ 51.84 MHz
10.0 ~ 35.0 MHz
VS. TEMPERATURE
+-1 ~ +-5 ppm
FREQUENCY STABILITY ^{VS. SUPPLY VOLTAGE}
VS. LOAD
+-0.5 ppm max. / 3.3VDC +-5%
+-0.2 ppm max. / 10 pF ~ 20 pF
VS. AGING
+-1 ppm max. per year
OPERATING TEMPERATURE RANGE
-0/+50°C ~ -40/+85°C
STORAGE TEMPERATURE RANGE
-40/+85°C
VOLTAGE
+5.0 VDC +-5%
INPUT
CURRENT
40 mA max. for HCMOS / TTL
3 mA max. for CLIPPED SINE WAVE
SYMMETRY ^STANDARD
OPTION
40/60% for HCMOS / TTL
45/55% for HCMOS / TTL
SIGNALS
HCMOS / TTL
CLIPPED SINE WAVE
RISE AND FALL TIME FOR HCMOS
10 ns max. (10% VDD TO 90% VDD)
RISE AND FALL TIME FOR TTL
10 ns max. (0.4 TO 2.4 VOLT)
OUTPUT ^{"0" LEVEL}
"1" LEVEL
HCMOS
10% VDD max.
90% VDD min.
"0" LEVEL
TTL
"1" LEVEL
CLIPPED SINE WAVE
0.4 VDC max.
2.4 VDC min.
1.0 V peak to peak min.
HCMOS
15 pF
LOAD
TTL
2 TTL
CLIPPED SINE WAVE
10 kΩ / 10 pF
FREQUENCY
ADJUSTMENT
STANDARD
OPTION
+-3 ppm min. per internal trimmer
+-5 ppm min. by external control voltage
EXTERNAL CONTROL VOLTAGE
2.5 VDC +-2.0 VDC
10 Hz offset from carrier
-80 dBc/Hz
PHASE NOISE (typical)
100 Hz offset from carrier
1 kHz offset from carrier
-105 dBc/Hz
-130 dBc/Hz
10 kHz offset from carrier
-145 dBc/Hz
100 kHz offset from carrier
-150 dBc/Hz
PIN 1
NOT CONNECT OR CONTROL VOLTAGE
PIN CONNECTION
PIN 7
PIN 8
CASE GROUND
OUTPUT
PIN 14
SUPPLY VOLTAGE
OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION
PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering
Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: [phone] / 30 53 97
http://www.petermann-technik.de | [e-mail]