MVS-2600 Datasheet, PDF(2/2 Page) PerkinElmer Optoelectronics

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

MVS-2600 Datasheet, PDF (2/2 Pages) PerkinElmer Optoelectronics – Machine Vision Strobes

◁

MVS-2600 Series

Optical Specifications

Spectral bandwidth (1)

Flashlamp arc length

Flash rate (2)

Flashlamp life (4)

Flash duration (2) (3)

Flash to flash variation

Light output (2)

MVS-2600 Series

300 to 1100+ nm

0.06 in (1.5mm)

60 Hz maximum

108 flashes

6 microseconds typical

<5%

Photometric: 2.5 lumen-sec

Radiometric: 20 mJ

Note 1:

Note 2:

Note 3:

Note 4:

Spectral bandwidth may be extended into the ultraviolet by using other flashlamp envelope materials.

Measured at light output port, 600 VDC and 4Âµf. Lower energy discharge levels providing higher flash rates and lower outputs are available.

Measured at 1/3 of peak current.

While maintaining >70% of initial intensity

Environmental Specifications

Operating temperature

Storage temperature

Shock and vibration

-10 to +110Â°C (-23 to +43Â°F)

-40 to +194Â°C (-40 to +90Â°F)

1.5 g. 5 to 20 Hz per MIL-STD 810C

Electrical Specifications

Type

Line input voltage

Input current

Output voltage (1)

Output power (2)

Reference voltage (3)

Tirgger input: (4)

Trigger

Pulse duration

MVS-2601

115/230 Â±10% VAC 50/60 Hz

(115 factory set)

1.2 amps maximum (115 VAC)

225 to 750 volts

43 watts maximum

3 to 10VDC

MVS-2602

15 to 28 VDC

4 amps peak at 24 VDC

200 to 750 volts

43 watts maximum

2 to 10 VDC

+5 volt pulse into opto-isolator with 150 ohm nominal series resistor

10 to 100 microseconds

Note 1:

Note 2:

Note 3:

Note 4:

Output measured @ front face of bulb.

Up to 20 watts with heat sink and natural convection cooling. Above 20 watts forced air cooling is required.

Output voltage may be adjusted using an external voltage reference source. MVS 2601, 75 volts per volt of reference. MVS 2602, 100 volts per volt of reference.

Delay between flash command and light output is 8 microseconds typical.

Mechanical Specifications

MATING INPUT

CONNECTOR(S)

SUPPLIED

0.218 X 0.281 MOUNTING SLOT (4 PLCS)

8.50 (215.9)

NEMA 13 ENCLOSURE

WEIGHT 6.5 LBS (3.0 kg)

DIMENSIONS ARE IN

INCHES (MILLIMETERS)

4.25 (108.0)

9.25 (235.0)

NOSEPIECE,

BLANK ADAPTER

AND HEAT SINK

SUPPLIED WITH

ALL MVS-2600

SERIES UNITS

For more information e-mail us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto.

All values are nominal; specifications subject to change without notice.

USA:

Europe:

Asia:

PerkinElmer Optoelectronics

35 Congress Street

Wenzel-Jaksch-Str. 31, D-65199 47 Ayer Rajah Crescent #06-12

Salem, MA 01970

Weisbaden, Germany

Singapore 139947

Toll Free: (800) 950-3441 (USA)

Phone: +49 (0) 611-492-437

Phone: +65 775 2022

Phone: (978) 745-3200

Fax: +49 (0)611-492-159

Fax: +65 775 1008

Fax: (978) 745-0894

0601