LC810 Datasheet, PDF (2/2 Pages) PerkinElmer Optoelectronics – LC 810 High Density Power Converter

LC 810 High Density Power Converter
DC Input Voltage Characteristics
Applicable
Nominal
Minimum
Maximum
Specs
MIL-STD-704
28
18
50
MIL-STD-1275
155
100
250
MIL-STD-1399
270
125
440
MIL-STD-704
General Characteristics
Isolation
Operating Baseplate Temperature Range
Efficiency (rated load)
Reliability Prediction
(single output configuration
@ 100W, MIL-HDBK-217F)
Input to output and to chassis: 1 µA@ 750Vdc
Output to chassis: 1 µA@ 50Vdc
-55°C to +85°C
> 80% typical
124,000 hours MTBF, 65°C baseplate, AUF
217,000 hours MTBF, 65°C baseplate, GM
345,000 hours MTBF, 65°C baseplate, NS
3,680,000 hours MTBF, 25°C baseplate, GB
DC Output Characteristics
No. of
Outputs
Output
No.
Output
Voltage
Voltage
Set Point
Rated
Power
Current
Limit,
Max.
Ripple &
Noise
(0-20 MHz)
Over-
voltage
Protection
Load
Regulation
(No load to
rated load)
Line
Regulation
3.3V, 5V, 6V,
150%
1
1
12V, 15V, 28V VO +/- 1%
up to 150W
of rated 2% P-P,rated load _110%-135%VO
0.5%VO
0.5%VO
and 40V
current
1
2
+15V
-15V
VO +/- 1%
62W
5.0A
62W
5.0A
2% P-P,rated load 110%-135%VO
3.0%VO
3.0%VO
2
1
2
+12V
-12V
VO +/- 1%
62W
7.8A
62W
7.8A
2% P-P,rated load 110%-135%VO
3.0%VO
3.0%VO
1
2&3
5V
+/-12V
VO +/- 1%
note (1)
77W note (2)
24W ea. note (2)
38.0A 2% P-P,rated load
3.0A 4% P-P,rated load2% ^110%-135%VO
0.5%VO
cross regulated
0.5%VO
cross regulated
3
1
2&3
5V
+/-15V
VO +/- 1%
note (1)
65W note (2)
30W ea. note (2)
38.0A
P-P,rated load
3.0A 4% P-P,rated load2% ^110%-135%VO
0.5%VO
cross regulated
0.5%VO
cross regulated
1
2&3
5V
+/-19V
VO +/- 1%
note (1)
50W note (2)
38W ea. note (2)
38.0A
3.0A
P-P,rated load
4% P-P,rated load ^110%-135%VO
0.5%VO
cross regulated
0.5%VO
cross regulated
Notes: (1) Output Nos. 2 and 3 track in proportion to Output No. 1
(2) Output No. 1 has a 2.0 Amp minimum load; Outputs Nos. 2 and 3 have a minimum load of 0.3 Amp. Outputs Nos. 2 and 3 are isolated and
parallelable. Maximum combined output for Outputs Nos. 1, 2 and 3 is 125 W.
Outline Dimensions
Other DC Output Characteristics
4.60
Output Transient Response (50% step load, normal line)
Line Transient Response (min. to max. line)
Turn-on/off Time (Power on/off and Remote on/off)
<150 µSec; Max Excursion ±10%VO
<150 µSec; Max Excursion ±5%VO
10 mSec
Ø.040 PIN
8 PL
-IN
Ø.156
(#6-32 INSERTS OPTIONAL)
LC810
-V OUT
Output Adjust
Parallel Operation Current Sharing
Output Sense Range
Temperature Drift (average over operating range)
±5% nominal VO
±10% rated load – Output 1
0.5Vdc from nominal – Output 1
0.02% VO/°C – Output 1
2.00
PARALLEL
SYNC
ON/OFF
+IN
CUST PIN
PERKINELMER PIN
INPUT DC
DATE CODE
SERIAL NO
-V SENSE
V ADJ
+V SENSE
+V OUT
For more information email us at [e-mail] or visit our
web site at www.perkinelmer.com/opto
Note: All specifications subject to change without notice.
3.25
3.450
2.300
.95
1.150
.510 ± .007
Ø.080 PIN
2 PL
1.750
1.500
1.40
1.00
.05 _.40 ^.70
.250
.275 ± 125
USA:
PerkinElmer Optoelectronics
1330 E. Cypress St.
Covina, CA 91724
P: [phone]
F: [phone]
.
© 2001 PerkinElmer, Inc. All rights reserved.
www.perkinelmer.com/opto
DS-243 Rev A 0901