HSH1000NEO Datasheet, PDF (2/2 Pages) PerkinElmer Optoelectronics – Lamps for Photolithography

HSH1000NEO
Operational Specifications
Description
Power (idling mode)
Power (flash mode)
Current (idling mode)
Current (flash mode)
Voltage (idling mode)
Voltage (flash mode)
Current Ripple
Temperature (at base)
Lifetime
Nominal
700 watts
1000 watts
16 amps (DC)
21.3 amps (DC)
44 volts (DC)
47 volts (DC)
3%
220ºC (max)
2500 hours
Dimensions
CATHODE (-)
END UP
Range
650-750 watts
1050 watts (max)
14.2-17.8 amps (DC)
19-23.6 amps (DC)
39-49 volts (DC)
42-52 volts (DC)
Ø29 MAX
166
187 MAX
86
ANODE (+)
END DOWN
All dimensions are in millimeters.
Notes
1. Lamp must be operated with cathode end up and
anode end down. Inclination of lamp axis to vertical
must not exceed 10º.
Physical Specifications
Description
Arc Gap
Anode Base
Cathode Base
Specification
3.0 mm (max)
Cooling Fins and Cable
15 mm Dia
Spectral Output
100
90
80
70
60
50
40
30
20
10
0
250 300 350 400 450 500 550 600 650 700 750
Wavelength (nm)
Typical Performance Graph
100
90
80
70
60
50
40
30
20
10
0
0
500
1000
1500
2000
2500
Hours of Operation
Part Number References
Used In
Nikon NSR-1505 G3, G4
Replaces
USH1000FNL (2&3)
HBO1000W/NL
PerkinElmer welcomes inquiries about special lamps. We would be pleased to discuss the requirements of your application and the feasibility of
designing a lamp specifically suited to your needs.
For more information e-mail us at [e-mail] or visit our web site at www.perkinelmer.com/opto.
All values are nominal; specifications subject to change without notice.
USA:
Europe:
Asia:
PerkinElmer Optoelectronics
PerkinElmer Optoelectronics GmbH
PerkinElmer Optoelectronics
44370 Christy St.
Wenzel-Jaksch-Str. 31
47 Ayer Rajah Crescent #06-12
Fremont, CA 94538
65199 Wiesbaden
Singapore 139947
Phone: [phone]
Germany
Phone: [phone]
Fax: [phone]
Phone: [phone]
Fax: [phone]
Fax: [phone]
.
© 2000 PerkinElmer inc. All rights reserved.
www.perkinelmer.com/opto
DS-176 Rev B 1101