AME270461_04 Datasheet, PDF (2/6 Pages) PerkinElmer Optoelectronics – EMI FILTER HYBRID / HIGH RELIABILITY

AME270461 Series
Specifications
ABSOLUTE MAXIMUM RATINGS Note 1
Input Voltage
-720V to +720V Note 2
Input Current
3.0 A
Lead Soldering Temperature
300°C for 10 seconds
Case Temperature
Operating
Storage
-55°C to +125°C
-65°C to +135°C
Electrical Characteristics -55°C ≤ TCASE ≤ +125°C, -270 ≤ VIN ≤ +270 unless otherwise specified
Parameter
INPUT VOLTAGE
OUTPUT VOLTAGE
OUTPUT CURRENT Note 3
DC RESISTANCE (R_DC) Note 4
POWER DISSIPATION
NOISE REDUCTION
ISOLATION
CAPACITANCE
DEVICE WEIGHT
Group A
Subgroups
Test Conditions
1, 2, 3
Steady State
Transient Note 2
1
T_C = 25°C
T_C = 125°C
Maximum Load Current
T_C = 25°C
T_C = 125°C
200 KHz - 500 KHz
500 KHz -1 MHz
1 MHz - 50 MHz
1
Any Pin to Case
Tested @ 500VDC
Measured Between Any Pin and Case
Slight Variations with Case Style
Min Nom Max
-400
-720
+400
+720
V_OUT = V_IN - I_IN x R_DC
1.5
400
700
0.9
1.58
35
60
65
100
40
95
Unit
V_DC
V_DC
A_DC
mΩ
W
dB
MΩ
nF
g
Notes to Specifications
1. Operation above maximum ratings may cause permanent damage to the device. Operation at maximum ratings may degrade
performance and affect reliability.
2. Device can tolerate ± 720 Volt transient whose duration is ≤ 100 ms when R_S ≥ 0.5 Ω.
3. Derate Output Current linearly from 100% at 125°C to 0 at 135°C.
4. DC resistance is the total resistance of the device and includes the sum of the input to output resistance and the return in to return
out resistance paths.
2
www.irf.com