LHI907 Datasheet, PDF (1/1 Pages) PerkinElmer Optoelectronics – Single Element Detector

Lighting | Imaging | Telecom
Pyroelectric Infrared Detectors
Single Element Detector LHi 907
Field of View
10
Round element design with compensation
Single FET output
Designed for ceiling mount applications
The LHi 907 pyroelectric infrared-detector is a special design for motion control
in ceiling mount applications. It includes a pyroelectric ceramic with a round
sensitive element connected to one FET in source follower connection, and a
compensational second element.
This detector is available inTO-5 housing with a standard infrared filter. It offers
low noise, and special field of view and capture for ceiling mount applications.
Parameters
Element size
Responsivity
min
LHi
907
typical max
units
condition
3300
1,77
4000
mm²
V/W
(1 element)
100°C, 1 Hz
Noise
20
50
µVpp 25°C, 0,3...10Hz
Offset Voltage
NEP
D*
0,2
1,5
V
R_S =47kW, 25°C
7,5x10^-10 23x10^-10 W ÖHz 1Hz Bw, 100°C, 1 Hz
6x10 ⁷ 19x10 ⁷
cm ÖHz/W 1Hz Bw, 100°C, 1 Hz
Output Impedance
5
10
Operating Voltage
2
15
Field of View, horizontal
150°
kW
R_S =47kW, 25°C
V
R_S =47kW, 25°C
unobstructed
vertical
145°
unobstructed
Operating Temp.
-40
Storage Temperature ^-40
85
°C
non permanent
85
°C
non permanent
1
0,1
0,01
0,1
1
10
f [Hz]
Frequency Response
Europe:
PerkinElmer Optoelectronics GmbH
Wenzel Jaksch Str 31
Wiesbaden / Germany
Phone [phone]
Fax [phone]
USA:
PerkinElmer Optoelectronics
2175 Mission Colledge Blvd
Santa Clara, CA 95054
Phone [phone]
Fax [phone]
all Dimensions in mm
Dimensions in mmm
Asia:
PerkinElmer Optoelectronics
47, Ayer Rajah Crescent #06-12
Singapore 139947
Phone [phone]
Fax [phone]
www.perkinelmer.com/opto