PI3HDMI413-A Datasheet, PDF (8/11 Pages) Pericom Semiconductor Corporation – 4-Differential Channel, 3:1 Mux/DeMux, DVI/HDMI Compliant Signal Switch based on TMDS Signaling Standard

PI3HDMI413-A
4-Differential Channel, 3:1 Mux/DeMux, DVI/HDMI
Compliant Signal Switch based on TMDS Signaling Standard
Test Circuit for Electrical Characteristics⁽¹⁾
�_��
�����_��
������
�_��
���������
�_�
�����
�_{���}
�������
���
�_�
�������
Notes:
1. C_L = Load capacitance: includes jig and probe capacitance.
2. R_T = Termination resistance: should be equal to Z_OUT of the Pulse Generator
3. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
4. All input impulses are supplied by generators having the following characteristics: PRR ≤ MHz, Z_O = 50Ω, t_R ≤ 2.5ns, t_F ≤ 2.5ns.
5. The outputs are measured one at a time with one transition per measurement.
Switch Positions
Test
t_PLZ, t_PZL (output on B-side)
t_PHZ, t_PZH (output on B-side)
Prop Delay
Switch
2 x (V_DD - V_SS)
V_SS
Open
Test Circuit for Dynamic Electrical Characteristics
���������������������
��
��
��
��������
������������
06-0243
8
PS8853A
08/24/06