English
Language : 

PT8A6301 Datasheet, PDF (7/15 Pages) Pericom Semiconductor Corporation – TDMA-Based 3-Player Remote Controller
PT8A6301/6311
TDMA-Based 3-Player Remote Controller
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DC Electrical Characteristics of PT8A6311
Sym
Description
Test Conditions
Min Typ Max Unit
VCC
Supply Voltage
-
1.0 1.2 2.6 V
ICC
Supply current
Note 2
- 0.3 3.0 mA
IIL
Input Low Current for logic input pins
Vin = 0
- -10
μA
IIH
Input High Current for logic input pins
Vin = VCC
- - 1 μA
IOH1 Output High Current1 for FORWARD and BACKWARD pins
Vout=VCC-0.2V
-150 -
- μA
IOL1 Output Low Current1 for FORWARD and BACKWARD pins
Vout=0.2V
4 - - mA
IOH2
Output High Current2 for LEFT ,RIGHT, F1 and F2 pins VCC=1.0V, Vout=VCC-0.2V -800 -
- μA
IOL2
Output Low Current3 for LEFT ,RIGHT, F1 and F2 pins
Vout=0.2V
150 600 - μA
IOH3
Output High Current3 for FOUT
VCC=1.0V, Vout=VCC-0.2V -800 -
- μA
IOL3
Output Low Current3 for FOUT
Vout=0.2V
800 -
- μA
VOFF
Amplifier input offset voltage
VCC=1.0v
- 20 mv
Note:
1. Test conditions Vcc=1.0-2.6V and TA=0°C to 70°C, unless otherwise specified
2. Feedback resistors for the two reversing amplifiers is 2.2MW and oscillator frequency is 125kHz.
AC Electrical Characteristics
Sym
Description
Test Conditions
Min Typ Max
fOSC
Oscillator frequency for PT8A6301
Oscillator frequency for PT8A6311
Td
The delay time between FC and SO(PT8T6301)
-
-
OSC frequency=1MHz
-
1
-
118 125 132
-
6
-
TAS
Auto-Stop Time*(PT8T6311)
OSC frequency=125kHz
- 800 -
VSI
SI Pin Receive Sensitivity(PT8T6311)
Guaranteed effective decoding 40 - 100
Note: These conditions (PT8A6301): Vcc=3.0V and TA=0°C to 70°C, unless otherwise specified
These conditions (PT8A6311): Vcc=1.0-2.6V and TA=0°C to 70°C, unless otherwise specified
*Auto-stop time: if no effective signal received within the time, system will turn off all outputs automatically.
Unit
MHz
KHz
ms
ms
mV
2014-10-0004
PT0136-6 11/19/14
7