PI3V514 Datasheet, PDF (5/9 Pages) Pericom Semiconductor Corporation – LOW ON RESISTANCE 3.3V HIGH BANDWIDTH 5-PORT 4:1 MUX/DEMUX VIDEOSWITCH

PI3V514
Low On-Resistance, 3.3V High-Bandwidth
5-port, 4:1 Mux/DeMux VideoSwitch
Switching Characteristics over 3.3V Operating Range
Parameters
Description
Conditions⁽¹⁾
t_PLH
t_PHL
Propagation Delay^(2,3) Y to In, In to Y
t_PZH
t_PZL
Enable Time S or EN to Y or In
t_PHZ
t_PLZ
Disable Time S or EN to Y or In
See Test Diagram
See Test Diagram
Min.
Com.
Typ.
Max.
0.3
Units
1.5
9.0
ns
1.5
9.0
Switching Characteristics over 2.5V Operating Range
Parameters
Description
Conditions⁽¹⁾
Com.
Min. Max.
t_PLH
t_PHL
Propagation Delay^(2,3) Y to In, In to Y
See Test Diagram
0.3
t_PZH
t_PZL
Enable Time S or EN to Y or In
t_PHZ
t_PLZ
Disable Time S or EN to Y or In
See Test Diagram
1.5
15.0
1.5
12.0
Notes:
1. See test circuit and waveforms.
2. This parameter is guaranteed but not tested on Propagation Delays.
3. The switch contributes no propagational delay other than the RC delay of the On-Resistance of the switch and the load
capacitance. The time constant for the switch alone is of the order of 0.30ns for 10pF load. Since this time constant is much
smaller than the rise/fall times of typical driving signals, it adds very little propagational delay to the system. Propagational
delay of the switch when used in a system is determined by the driving circuit on the driving side of the switch and its
interaction with the load on the driven side.
Units
ns
Bandwidth vs Capacitance
500
400
300
200
100
0
0 pf
10 pf
20 pf
30 pf
Capacitance Load
40 pf
50 pf
5
PS8755A
11/02/04