|
PI3L510 Datasheet, PDF (5/6 Pages) Pericom Semiconductor Corporation – 3.3V, 4-Channel, 2:1, Mux/DeMux Fast Ethernet LAN Switch w/ Single Enable | |||
|
◁ |
Switching Waveforms
PI3L510
3.3V, 4-Channel, 2:1, Mux/DeMux
Fast Ethernet LAN Switch w/ Single Enable
Input
2.5V
tPLH
Output
2.5V
2.5V
3.5V
1.5V
tPHL
2.5V
VOH
VOL
SEL
tPZL
Output
tPZH
Output
1.25V
1.25V
tPLZ
VDD/2
tPHZ
VDD/2
VOL +0.3V
VOH â0.3V
2.5V
0V
VOH
VOL
VOH
VOL
Voltage Waveforms Propagation Delay Times
Voltage Waveforms Enable and Disable Times
Data In
tPLHX
Data Out
at Channel X
I
Data Out
at Channel Y
tPLHy
tPHLX
tSK(o)
tPHLy
3.5V
2.5V
1.5V
VOH
2.5V
VOL
VOH
2.5V
VOL
tSK(o) = I tPLHy â tPLHx I or I tPHLy â tPHLx I
Output Skew - tSK(o)
Input
tPLH
tPHL
Output
tSK(p) = I tPHL â tPLH I
Pulse Skew - tSK(p)
3.5V
2.5V
1.5V
VOH
2.5V
VOL
⢠Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
⢠Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
⢠All input impulses are supplied by generators having the following characteristics: PRR ⤠10 MHz, ZO = 50-ohm, tR ⤠2.5ns, tF ⤠2.5ns.
⢠The outputs are measured one at a time with one transition per measurement.
Applications Information
Logic Inputs
The logic control inputs can be driven up to +3.6V regardless of the supply voltage. For example, given a +3.3V supply, the output enables
or select pins may be driven low to 0V and high to 3.6V. Driving the control pin(s) Rail-to-Rail® minimizes power consumption.
Power-Supply Sequencing
Proper power-supply sequencing is advised for all CMOS devices. It is recommended to always apply VCC before applying signals to
the input/output or control pins.
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd
07-0077
5
PS8720c
03/26/07
|
▷ |