 English |
|
|
|
|
|
|
|
| PI74FCT373T_07 Datasheet, PDF (4/10 Pages) Pericom Semiconductor Corporation – Octal Transparent Latches | |||
| |||
| ◁ |
PI74FCT373T
PI74FCT573T
OCTAL TRANSPARENT LATCHES
Power Supply Characteristics
Parameters Description
ICC
Quiescent Power
Supply Current
ÎICC
Supply Current per
Input @ TTL HIGH
ICCD
Supply Current per
Input per MHz(4)
IC
Total Power Supply
Current(6)
Test Conditions(1)
VCC = Max.
VIN = GND or VCC
Min.
Typ(2)
0.1
Max.
500
Units
μA
VCC = Max.,
VIN = 3.4V(3)
0.5 2.0 mA
VCC = Max.,
Outputs Open
OE = GND
LE = VCC
One Bit Toggling
50% Duty Cycle
VCC = Max.,
Outputs Open
fI = 10 MHZ
50% Duty Cycle
OE = GND
LE = VCC
One Bit Toggling
VCC = Max.,
Outputs Open
fI = 2.5 MHZ
50% Duty Cycle
OE = GND
LE = VCC
Eight Bits Toggling
VIN = VCC
VIN = GND
VIN = VCC
VIN = GND
VIN = 3.4V
VIN = GND
VIN = VCC
VIN = GND
VIN = 3.4V
VIN = GND
0.15 0.25 mA/
MHz
1.5 3.0(5) mA
1.8 4.5(5)
3.0 6.0(5)
5.0 14.0(5)
Notes:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at Vcc = 5.0V, +25°C ambient.
3. Per TTL driven input (VIN = 3.4V); all other inputs at Vcc or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of the Icc formula. These limits are guaranteed but not tested.
6. IC =IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ÎICC DHNT + ICCD (fCP/2 + fINi)
ICC = Quiescent Current
ÎICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
fI = Input Frequency
NI = Number of Inputs at fI
All currents are in milliamps and all frequencies are in megahertz.
06-0218
4
PS2015E 04/12/07
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese