PI3V314 Datasheet, PDF (4/10 Pages) Pericom Semiconductor Corporation – Low On-Resistance, 3.3V High-Bandwidth 3-Port, 4:1 Mux/DeMux VideoSwitch

PI3V314
Low On-Resistance, 3.3V High-Bandwidth
3-Port, 4:1 Mux/DeMux VideoSwitch
Capacitance (T_A = 25°C f = 1 MHz)
Parameters⁽⁵⁾
Description
C_IN
C_OFF(IN)
C_OFF(Y)
C_ON
Input Capacitance
In Capacitance, Switch Off
Y Capacitance, Switch Off
Y/In Capacitance, Switch On
Test Conditions
Typ.
3.0
3.5
V_IN = 0V
12
15.0
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at V_CC = 3.3V, T_A = 25°C ambient and maximum loading.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. Measured by the voltage drop between Y and In pin at indicated current through the switch. On-Resistance is determined
by the lower of the voltages on the two (Y, In) pins.
5. This parameter is determined by device characterization but is not production tested.
Units
pF
Power Supply Characteristics
Parameters
Description
Test Conditions⁽¹⁾
Min. Typ.⁽²⁾
I_CC
Quiescent Power Supply Current
V_CC = 3.6V, V_IN = GND or V_CC
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at V_CC = 3.3V, +25°C ambient.
Max.
1.6
Units
mA
Dynamic Electrical Characteristics Over the Operating Range (T_A = -40º to +85º, V_CC = 3.3V ± 10%)
Parameter
Description
Test Condition
Min.
Typ.
Max.
X_TALK
Crosstalk
See Test Diagram (10 MHz)
-60
O_IRR
Off-Isolation
See Test Diagram (10 MHz)
-60
BW
-3dB Bandwidth
See Test Diagram (C_L = 0pF)
100
375
Units
dB
MHz
4
PS8756A
11/02/04