|
PI3HDMI411AD Datasheet, PDF (4/9 Pages) Pericom Semiconductor Corporation – DVI / HDMI Re-Driver w/ Equalization, De-emphasis & Pre-emphasis | |||
|
◁ |
PI3HDMI411AD
DVI / HDMI Re-Driver
w/ Equalization, De-emphasis & Pre-emphasis
TMDS Compliance Test Results
Item
HDMI 1.3 Spec
Pericom TMDS Product Spec
Operating Conditions
Termination Supply Voltage, AVDD
Terminal Resistance
3.3V ⤠5%
50-ohm ⤠10%
3.30 ± 5%
45 to 55-ohm
Source DC Characteristics at TP1
Single-ended high level output voltage, VH
AVDD ⤠10mV
AVDD ⤠10mV
Single-ended low level output voltage, VL
Single-ended output swing voltage, Vswing
Single-ended standby (off) output voltage, Voff
Single-ended standby (off) output current, Ioff
Transmitter AC Characteristics at TP1
(AVDD - 600mV) ⤠VL ⤠(AVDD - 400mV)
400mV ⤠Vswing ⤠600mV
AVDD ± 10mV (informative)
| IOFF | < 100uA
(AVDD - 600mV) ⤠VL ⤠(AVDD
- 400mV)
400mV ⤠Vswing ⤠600mV
AVDD ± 10mV
| IOFF | <10uA
Risetime/Falltime (20%-80%)
75ps ⤠Risetime/Falltime ⤠0.4 Tbit
(75ps ⤠tr/tf ⤠242ps) @ 1.65Gbps
240ps
Intra-Pair Skew at Transmitter Connector, max 0.15 Tbit
(90.9ps @ 1.65Gbps)
60ps max
Inter-Pair Skew at Transmitter Connector, max 0.2 Tpixel
(1.2ns @ 1.65Gbps)
100ps max
Clock Jitter, max
0.25 Tbit
(151.5ps @ 1.65Gbps)
82ps max
Sink Operating DC Characteristics at TP2
Input Differential Voltage Level, Vdiff
150 ⤠Vdiff ⤠1200mV
150mV ⤠VDIFF ⤠1200mV
Input Common Mode Voltage Level, VICM
100Ω ± 15Ω
Sink DC Characteristics When Source Disabled or Disconnected at TP2
AVDD -300mV ⤠VICM < AVDD -
37.5mV or AVDD ±10%
Differential Voltage Level
AVDD ± 10mV
AVDD ± 10mV
07-0017
4
PS8845G
01/18/07
|
▷ |