PI3EQX4951ST Datasheet, PDF (4/9 Pages) Pericom Semiconductor Corporation – 3.3V, 1-port, SATA2 i/m ReDriver with Analog/Digital Configuration

PI3EQX4951ST
3.3V, 1-Port, SATA2 i/m ReDriver™with Analog/Digital Configuration
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature................................................................–65°C to +150°C
Supply Voltage to Ground Potential........................................–0.5V to +4.6V
DC SIG Voltage..................................................................–0.5V to V_DD +0.5V
Current Output ...................................................................... -25mA to +25mA
Power Dissipation Continuous.............................................................. 500mW
Operating Temperature......................................................................0 to +70°C
ESD, Human Body Model......................................................-8kV to +8kV
Note:
Stresses greater than those listed under MAXIMUM RAT-
INGS may cause permanent damage to the device. This is
a stress rating only and functional operation of the device
at these or any other conditions above those indicated in
the operational sections of this specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
AC/DC Electrical Characteristics
Symbol
Parameter
V_DD
P_STANDBY
P_SLUMBER
Power Supply Voltage
Supply Power, Standby
Supply Power, Slumber
P_ACTIVE
Supply Power, Active
I_DD-STANDBY
I_DD-SLUMBER
I_DD-ACTIVE
t_PD
Supply Current Standby
Supply Current Slumber
Supply Current Active
Latency
Conditions
EN = 0
Min.
3.0
EN = 1
DIFFP-P ^{≥ V}TH-SD
EN = 0
EN = 1, V_RX-DIFFp-p ≥ V_TH-SD
From input to output
Typ.
33
1.5
Max.
3.6
0.10
54
350
0.030
15
95
Units
V
mW
mA
ns
CML Receiver Input
Z_RX-DC
Z_RX-DIFF-DC
DC Input Impedance
DC Differential Input
Impedance
40
50
60
Ohm
80
100
120
V_RX-DIFFp-p
Differential Input Peak-to-
peak Voltage
0.2
0.7
V
V_RX-CM-ACP
AC Peak Common Mode
Input Voltage
V_TH-SD
Signal detect Threshold
EN = 1
50
75MHz-300MHz
18
150
200⁽²⁾
mV
mVppd
300MHz-600MHz
14
RL_{dd11_RX}
RX differential mode return
loss
600MHz-1.2GHz
1.2GHz-2.4GHz
10
8
dB
2.4GHz-3.0GHz
3
3.0 GHz-5.0GHz
1
(continued)
Note:
1. Typical values are at V_DD = 3.3V, T_A = 25°C ambient and maximum loading.
2. Using Compliance test at 1.5Gbps and 3Gbps. Also using OOB (OOB is formed by ALIGNp primitive or D24.3) test patterns at 1.5Gbps. The ALIGN primitive
(K28.5+D10.2+D27.3 = 0011111010+0101010101+0010011100). The D24.3 = 00110011001100110011
10-0142
4
www.pericom.com
PS9072A
03/23/10