PI3EQX4951B Datasheet, PDF (4/9 Pages) Pericom Semiconductor Corporation – 3.3V, 1-port, SATA2 i/m ReDriver with Analog/Digital Configuration

PI3EQX4951B
3.3V, 1-Port, SATA2 i/m ReDriver™ with Analog/Digital Configuration
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature................................................................–65°C to +150°C
Supply Voltage to Ground Potential........................................–0.5V to +4.6V
DC SIG Voltage..................................................................–0.5V to V_DD +0.5V
Current Output ..................................................................... –25mA to +25mA
Power Dissipation Continuous.............................................................. 500mW
Operating Temperature......................................................................0 to +70°C
ESD, Human Body Model.....................................................–6kV to +6kV
Note:
Stresses greater than those listed under MAXIMUM RAT-
INGS may cause permanent damage to the device. This is
a stress rating only and functional operation of the device
at these or any other conditions above those indicated in
the operational sections of this specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
AC/DC Electrical Characteristics
Symbol
Parameter
V_DD
P_STANDBY
Power Supply Voltage
Supply Power, Standby
P_IDLE
Supply Power, Idle
P_ACTIVE
I_DD-STANDBY
I_DD-IDLE
I_DD-ACTIVE
t_PD
Supply Power, Active
Supply Current Standby
Supply Current Idle
Supply Current Active
Latency
Conditions
EN = 0
EN = 1, x_EN# = 0
DIFFP-P ^{< V}TH-SD
EN = 1, x_EN# = 0
DIFFP-P ^{≥ V}TH-SD
EN = 0
EN = 1, x_EN# = 0, V_RX-DIF-
FP-P ^{< V}TH-SD
EN = 1, x_EN# = 0, V_RX-DIF-
FP-P ^{≥ V}TH-SD
From input to output
Min.
3.0
Typ.
235
70
2.0
Max.
3.6
1.5
440
0.4
120
Units
V
mW
mW
mW
mA
ns
CML Receiver Input
Z_RX-DC
DC Input Impedance
Z_RX-DIFF-DC
DC Differential Input
Impedance
V_RX-DIFFP-P
Differential Input Peak-to-
peak Voltage
V_RX-CM-ACP
AC Peak Common Mode
Input Voltage
V_TH-SD
Signal detect Threshold
EN = 1, x_EN# = 0
40
50
60
Ω
80
100
120
0.2
1.6
V
150
mV
50
200 ⁽¹⁾
mVppd
(continued)
Note:
Using Compliance test at 1.5Gbps and 3Gbps. Also using OOB (OOB is formed by ALIGNp primitive or D24.3) test patterns at 1.5Gbps. The ALIGN primi-
tive (K28.5+D10.2+D27.3 = 0011111010+0101010101+0010011100). The D24.3 = 00110011001100110011
10-0248
4
www.pericom.com
PS9016B
12/09/10