|
PT7M6118 Datasheet, PDF (3/11 Pages) Pericom Semiconductor Corporation – Low Power Voltage Detector | |||
|
◁ |
PT7M6118-6150 CL/CH /NL
Low Power Voltage Detector
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Maximum Ratings
Storage Temperature ............................................................-65oC to +150oC
Ambient Temperature with Power Applied.......................... -40oC to +85oC
Supply Voltage to Ground Potential (Vcc to GND) ..............-0.3V to +6.0V
DC Input Voltage (All inputs except Vcc and GND)......-0.3V to VCC+0.3V
DC Output Current (All outputs) ..........................................................20mA
Power Dissipation .......................................... 320mW (Depend on package)
Note:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the
device. This is a stress rating only and functional
operation of the device at these or any other condi-
tions above those indicated in the operational sec-
tions of this specification is not implied. Exposure
to absolute maximum rating conditions for extended
periods may affect reliability.
DC Electrical Characteristics
(VCC = 1.2V to 5.5V, TA= -40~85ºC, unless otherwise noted. Typical values are at TA = +25ºC)
Description
Sym.
Test Conditions
Min
Typ
Max
Unit
Supply Voltage
TA= 0~70ºC
VCC
TA= -40~85ºC
1.0
-
5.5
V
1.2
-
5.5
Supply Current
VCC = 3.6V. No load.
ICC
VCC = 5V. No load.
-
1.0
3.0
µA
-
1.3
3.6
µA
VCC ⥠1.8V, Isource = 1mA
0.8ÃVcc
-
-
Output high
VOH
VCC ⥠2.5V, Isource = 3mA
0.8ÃVcc
-
-
V
Output
Driving
VCC ⥠4.5V, Isource = 8mA
0.8ÃVcc
-
-
VCC ⥠1.2V, Isink = 1mA
-
-
0.3
Output low
VOL
VCC ⥠2.5V, Isink = 4mA
-
-
0.3
V
Open-Drain Output Leakage
Current
Voltage Threshold
ILKG
VTH-
VTH+
VCC ⥠4.5V, Isink = 9mA
-
+25ï°C
-40ï°C~85ï°C
+25ï°C
-40ï°C~85ï°C
-
-
0.4
-
-
1
ïA
(VTH-)
ï´0.985
VTH-
(VTH-)
ï´1.015
(VTH-)
ï´0.975
(VTH+)
ï´0.985
VTH-
VTH+
(VTH-)
ï´1.025
(VTH+)
ï´1.015
V
(VTH+)
ï´0.975
VTH+
(VTH+)
ï´1.025
voltage threshold Hysteresis
VHYST
VHYST = [(VTH+)-(VTH-)]/(VTH-)
ï´100%
3
-
4.5
1
6
-
%
Note: VTH+ = 1.05 ï´ VTH- ãVTH- is voltage threshold when Vcc falls from high to low. VTHï¼is voltage threshold when Vcc rises
from low to high.
2015-12-0005
PT0181-15
01/18/16
3
|
▷ |