PI5V330SWE Datasheet, PDF (3/8 Pages) Pericom Semiconductor Corporation – Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux

PI5V330S
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
Dynamic Characteristics (Over the Operating Range, T_A = –40°C to +85°C, V_DD = 5V ±5%)
Parameters
Description
Test Conditions
Min. Typ. Max. Unit
t_ON
t_OFF
B_W(1)
Turn On Time
Turn Off Time
-3 dB Bandwidth
R_L = 75Ω, C_L = 20_PF, See Fig. 4
R_L = 75Ω, C_L = 20_PF, See Fig. 4
See Fig. 5
2.5
5
ns
1.1
5
570 MHz
X_TALK
C_IN(1)
C_OFF(1)
Crosstalk
Input/Enable Capacitance
Capacitance, Switch Off
10MHz, See Fig. 5, C_L = 0pF
V_IN = 0V, f = 1 MHz
V_IN = 0V, f = 1 MHz
-80
dB
6
6
pF
C_ON(1)
Capacitance, Switch On
V_IN = 0V, f = 1 MHz
O_IRR
Off Isolation
10MHz, See Fig 5, C_L = 0pF
Notes:
1. This parameter is determined by device characterization but is not production tested.
9
-48
dB
Power Supply Characteristics
Parameters
Description
Test Conditions⁽¹⁾
Min. Typ⁽²⁾ Max. Units
I_CC
Quiescent Power
Supply Current
V_DD = Max.
IN = GND or V_DD
0.1 3.0 µA
∆_ICC
Supply Current per Input
@ TTL HIGH
V_DD = Max.
IN = 3.4V⁽³⁾
2.5 mA
I_CCD
Supply Current per Input
per MHz⁽⁴⁾
V_DD = Max., S1, S2 and D
Pins Open EN = GND
Control Input Toggling
50% Duty Cycle
0.25
mA/
MHz
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at V_DD = 5.0V, +25°C ambient.
3. Per TTL driven input (V_IN = 3.4V, control inputs only); S1, S2, and D pins do not contribute to I_CC.
4. This current applies to the control inputs only and represent the current required to switch internal capacitance at the specified frequency. The
S1, S2, and D I/O pins generate no significant AC or DC currents as they transition. This parameter is not tested, but is guaranteed by design.
13-0016
3
PS7032I
12/12/12