PI3USB302-A Datasheet, PDF (3/9 Pages) Pericom Semiconductor Corporation – 3.3V, USB 3.0, 1-Port, 2:1 Mux/DeMux Switch

PI3USB302-A
3.3V, USB 3.0, 1-Port, 2:1 Mux/DeMux Switch
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature .....................................................–65°C to +150°C
Supply Voltage to Ground Potential .................................–0.5V to +4.6V
Channel DC Input Voltage ................................................. –0.5V to 1.5V
SEL/PD DC Input Voltage ................................................. –0.5V to 4.6V
DC Output Current ........................................................................ 120mA
Power Dissipation ............................................................................ 0.5W
Note: Stresses greater than those listed under MAXI-
MUM RATINGS may cause permanent damage to
the device. This is a stress rating only and functional
operation of the device at these or any other conditions
above those indicated in the operational sections of
this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may
affect reliability.
Electrical Characteristics
Recommended Operating Conditions
Symbol
Parameter
Conditions
Min Typ Max Units
V_DD
I_DD
I_{DD_PD}
T_CASE
3.3V Power Supply
Total current from V_DD
3.3V supply
SEL = 0V or V_DD,
Power down current
PD = 1
Case temperature range
for operation within spec.
3.0
3.3
3.6
V
0.2
1
20
40
-40
85
mA
uA
Celsius
DC Electrical Characteristics for Switching over Operating Range
Parameters Description
Test Conditions⁽¹⁾
Min
VIH-SEL, _PD Input HIGH Voltage, SEL, PD Input
2
VIL-SEL, _PD Input LOW Voltage, SEL, PD Input
0
VIK
Clamp Diode Voltage
V_DD = Max, I_IN = –18mA
IIH
Input HIGH Current SEL, PD Input V_DD = Max, V_IN = V_DD -5
IIL
Input LOW Current, SEL, PD Input V_DD = Max, V_IN = 0V
-5
I_IH
Input High Current, T_X, R_X
V_DD = Max, V_IN = 1.5V -10
I_IL
Input LOW Current, T_X, R_X
V_DD = Max, V_IN = 0V
-10
I_OZH
High Z HIGH Current, T_X, R_X
V_DD = Max, V_IN = 1.5V -10
I_OZL
High Z LOW Current, T_X, R_X
V_DD = Max, V_IN = 0V
-10
Note:
1. Typical values are at V_DD = 3.3V, T_A = 25°C ambient and maximum loading.
Typ⁽¹⁾
–0.7
Max
3.6
0.8
–1.2
+5
+5
+10
+10
+10
+10
Units
V
µA
µA
µA
Switching Characteristics
Parameters Description
Test Conditions
tPZH, tPZL
tPHZ, tPLZ
tb-b
tch-ch
Line Enable Time
Line Disable Time
Bit-to-bit skew within the same differential pair
Channel-to-channel skew
Min.
Typ.
25
5
5
Max.
30
25
10
20
Units
ns
ps
All trademarks are property of their respective owners.
15-0076
3
www.pericom.com 06/17/15