PI3USB223 Datasheet, PDF (3/10 Pages) Pericom Semiconductor Corporation – USB 2.0 High-Speed and Audio Switches with Negative Signal Capability

PI3USB223
USB 2.0 High-Speed and Audio Switches
with Negative Signal Capability
Maximum Ratings
(Above which useful life may be impaired.For user guidelines, not tested.)
(Voltages referenced to GND.)
V_DD, ASEL..................................................................... -0.3V to +5.0V
V_BUS............................................................................... -0.3V to +5.5V
V_{(R/D+) and} V_(L/D-)(1)....................................................... -2.0V to +5.0V
V_(R/D+) and V_(L/D-)(2)..................................................... -0.3V to +5.0V
V_{R and} V_L.............................................................. -2.0Vto (V_DD+ 0.3V)
V_{D+ and} V_D........................................................... -0.3V to (V_DD+ 0.3V)
Continuous Current into Any Terminal.....................................±100mA
Operating Temperature Range........................................-40°C to +85°C
Storage Temperature Range..........................................-65°C to +150°C
Notes:
1. If Audio path is enabled
2. If USB path is enabled
Stresses greater than those listed under MAXIMUM RAT-
INGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at
these or any other conditions above those indicated in the
operational sections of this specification is not implied. Ex-
posure to absolute maximum rating conditions for extended
periods may affect reliability.
DC Electrical Characteristics
(V_DD = 2.7V to 4.4V, T_A = –40°Cto +85°C, unless otherwise noted. Typical values are at V_DD = 3.0V to 3.6V, T_A = 25°C)
Parameter
Symbol
Test Conditions
Min. Typ. Max.
Operating Power-supply
range
V_DD
2.7 – 4.4
Units
V
Supply Current
I_CC
V_DD = 3.3V ASEL = VBUS = 0V
–
– 50 μA
Power-supply Rejection
Ratio
Analog Signal Range
R/L On-Resistance
PSRR
V_D+/-
V_R/L
R_ON(R/L)
D+/D- On-Resistance
R_ON(D+/-)
R/L On-Resistance Match
between Channels
ΔR_ON(R/L)
D+/- On-Resistance Match
between Channels
ΔR_ON(D+/D-)
R/L On-Resistance Flat-
ness
R_FLAT(R/L)
D+/D- On-Resistance
Flatness
R_FLAT(D+/-)
Shunt Switch Resistance R_SH
D+/- Off-Leakage Current I_D+/-(OFF)
R/L Off-Leakage Current I_R/L(OFF)
f = 10kHz,V_DD = 3.0 ±0.3V,
R_D+/R =50Ω
–
60
–
dB
0
V_DD
V
-2
V_DD
V_DD = 3.0V, V_R/L = -1.5V,
+1.5V, I_{D+/R and D-/L} = 10mA
2
5
V_DD = 3.0V, V_D+/- = -0.4V to 0.6V,
I_{D+/R and D-/L} = 10mA
3.5 6
V_DD = 3.0V,
V _{D+/R and D-/L} = 1.0V to 3.0V,
12
I _{D+/R and D-/L} = 10mA
V_DD = 3.0V, V_R/L = 0V, I_{D+/R and}
D-/L ^{= 10mA}
0.2
Ω
V_DD = 3.0V, V_D+/- = 0V,
I_{D+/R and D-/L} = 10mA
0.2
V_DD = 3.0V, I_{D+/R and D-/L} = 10mA,
V_R/L = -1.5V to+1.5V
0.3 0.5
V_DD = 3.0V, I _{D+/R and D-/L}=10m
A, V_D+/- =-0.4V to 0.6V
0.25 0.5
Voltage on R or L = V_DD
25
kΩ
V_DD = 3.0V, V_D+/- = 5V,
V _{D+/R and D-/L} = -1.5V, +2.5V
-1
V_DD = 3.0V, V_R/L = 0V,
V _{D+/R and D-/L} = 0V, +2.5V
-1
1
μA
1
All trademarks are property of their respective owners.
15-0127
3
www.pericom.com 10/27/15