PI3USB14-A Datasheet, PDF (3/9 Pages) Pericom Semiconductor Corporation – Low Voltage, High Bandwidth, USB 2.0, 4:1 Mux/DeMux with Single Enable

PI3USB14-A
Low Voltage, High Bandwidth, USB 2.0, 4:1 Mux/DeMuxwith Single Enable
Capacitance (T_A = 25°C f = 1 MHz)
Parameters⁽⁵⁾
Description
Test Conditions
Typ.
Units
C_IN
Input Capacitance
2.0
C_OFF(IN)
C_OFF(Y)
In Capacitance, Switch Off
Y Capacitance, Switch Off
V_IN = 0V
2.5
pF
4
C_ON
Y/In Capacitance, Switch On
8
Notes
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at V_DD = 3.3V, T_A = 25°C ambient and maximum loading.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. Measured by the voltage drop between Y and In pin at indicated current through the switch. On-Resistance is determined by the lower of the voltages on the
two (Y, In) pins.
5. This parameter is determined by device characterization but is not production tested.
Power Supply Characteristics
Parameters Description
Test Conditions⁽¹⁾
Min. Typ.⁽²⁾ Max. Units
I_CC
Quiescent Power Supply Current V_DD = 3.6V, V_IN = GND or V_DD
60 µA
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at VDD = 3.3V, +25°C ambient.
3. Per LVTTL driven input (control inputs only); Y and In pins do not contribute to ICC. This parameter is guaranteed, but not production tested.
11-0013
3
PS9055
11/23/10