PI3PCIE3212 Datasheet, PDF (3/11 Pages) Pericom Semiconductor Corporation – 3.3V, PCI Express 3.0, 1-Lane, 2-Channel, 8Gbps, 2:1 Mux/DeMux Switch w/ Single Enable

PI3PCIE3212
3.3V, PCI Express® 3.0, 1-Lane, 2-Channel,
8Gbps, 2:1 Mux/DeMux Switch w/ Single Enable
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature .....................................................–65°C to +150°C
Supply Voltage to Ground Potential .................................–0.5V to +4.6V
Channel DC Input Voltage ................................................. –0.5V to 1.5V
DC Output Current ........................................................................ 120mA
Power Dissipation ............................................................................ 0.5W
SEL/PD DC Input Voltage ................................................. –0.5V to 4.6V
Note: Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device. This
is a stress rating only and functional operation of the device
at these or any other conditions above those indicated in the
operational sections of this specification is not implied. Expo-
sure to absolute maximum rating conditions for extended
periods may affect reliability.
Electrical Characteristics
Recommended Operating Conditions
Symbol
Parameter
V_DD
I_DD
I_{DD_PD}
V_I/O-DIF
V_I/O-CM
T_CASE
3.3V Power Supply
Total current from V_DD 3.3V supply
Power down current
Differential Voltage (differential pins)
Common Mode Voltage (differential
pins)
Case temperature range for operation
within spec.
Conditions
SEL = OV or V_DD
PD = 1
Min
Typ
Max Units
3.0
3.3
3.6
V
0.2
1
mA
20
40
µA
1.6
V_ppd
0
0.8
V
-40
85 Celsius
DC Electrical Characteristics for Switching over Operating Range
Parameters Description
Test Conditions⁽¹⁾
VIH - _{SEL, PD}
VIL - _{SEL, PD}
VIK
IIH
IIL
IIH
Input HIGH Voltage, SEL, PD Input
Input LOW Voltage, SEL, PD Input
Clamp Diode Voltage
Input HIGH Current, SEL, PD
Input LOW Current, SEL, PD
Input HIGH Current, A_X, B_X, C_X
V_DD = Max., I_IN = –18mA
V_DD = Max., V_IN = V_DD
V_DD = Max., V_IN = 0V
V_DD = Max., V_IN = 1.5V
IIL
Input LOW Current, A_X, B_X, C_X
V_DD = Max., V_IN = 0V
IOZH
HighZ HIGH Current, B_X, C_X
V_DD = Max., V_IN = 1.5V
IOZL
HighZ LOW Current, B_X, C_X
V_DD = Max., V_IN = 0V
Note:
1. Typical values are at V_DD = 3.3V, T_A = 25°C ambient and maximum loading.
Min Typ⁽¹⁾ Max Units
2
3.6
0
0.8
V
–0.7 –1.2
±5
µA
±5
–10
+10
µA
–10
+10
–10
+10 µA
–10
+10 µA
All trademarks are property of their respective owners.
14-0011
3
www.pericom.com 11/18/14