English
Language : 

PI3PCIE2215 Datasheet, PDF (3/10 Pages) Pericom Semiconductor Corporation – 3.3V, PCI Express 1-lane, 2:1 Mux/DeMux Switch
◁
PI3PCIE2215
3.3V, PCI Express®, 1-Lane,
2:1 Mux/DeMux Switch
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature ....................................................–65°C to +150°C
Supply Voltage to Ground Potential ................................–0.5V to +4.6V
DC Input Voltage .............................................................. –0.5V to VDD
DC Output Current ....................................................................... 120mA
Power Dissipation ........................................................................... 0.5W
Note: Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device. This
is a stress rating only and functional operation of the device
at these or any other conditions above those indicated in the
operational sections of this specification is not implied. Expo-
sure to absolute maximum rating conditions for extended
periods may affect reliability.
Electrical Characteristics
Recommended Operating Conditions
Symbol
Parameter
VDD
3.3V Power Supply
Conditions
Min Typ Max Units
3.0 3.3 3.6
V
IDD
TCASE
Total current from VDD
3.3V supply
Case temperature range
for operation within spec.
0
2.5
mA
-40
85 Celsius
DC Electrical Characteristics (TA = –40°C to +85°C, VDD = 3.3V ± 10%)
Parameter
Description
Test Conditions
VIH-SEL(2)
Input high level, SEL input
VIL-SEL(2)
Input Low Level, SEL
input
IIN_SEL(2)
Input Leakage Current,
SEL input
Measured with input at VIH-SEL max and
VIL-SEL min
RON
On Resistance
VDD = Min., VIN = 1.3V, IIN = 40mA
CON
On Channel Capacitance VIN = 0, VDD = 3.3V
Note:
1. Typical values are at VDD = 3.3V, TA = 25°C ambient and maximum loading.
Min Typ(1) Max
2.0
3.6
Units
V
0
0.8
V
–10
10
μA
12
Ohm
2.0
pF
Dynamic Electrical Characteristics for xI±, xOy±
Parameter
Description
Test Conditions
DDIL
Differential Insertion Loss
f=1.2GHz
f=2.5GHz
f=5.0GHz
f=7.5GHz
DDILOFF Differential Off Isolation
f= 0 to 3.0GHz
DDRL
Differential Return Loss
f= 0 to 2.8GHz
f= 2.8 to 5.0GHz
f= 5.0 to 7.5GHz
DDNEXT Near End Crosstalk
f= 0 to 2.5GHz
f= 2.5 to 5.0GHz
f= 5.0 to 7.5GHz
09-0033
3
Min.
-1.5
-2.0
-5.0
-9.0
Typ.(1)
-14.0
-8.0
-4.0
Max. Units
-20.0
dB
-32.0
-26.0
-20.0
PS9069
08/03/09
 ▷