English
Language : 

PI3HDMI414 Datasheet, PDF (3/10 Pages) Pericom Semiconductor Corporation – 4-Differential Channel, 4:1 Mux/DeMux, DVI/HDMI Compliant Signal Switch
◁
PI3HDMI414
4-Differential Channel, 4:1 Mux/DeMux,
DVI/HDMI Compliant Signal Switch
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature ................................................... –65°C to +150°C
Supply Voltage to VSS Potential...................................... –0.5V to +2.5V
DC Input Voltage ............................................ VSS –0.5V to VDD +0.5V
DC Output Current ...................................................................... 120mA
Power Dissipation .......................................................................... 0.5W
Note:
Stresses greater than those listed under MAXIMUM RATINGS
may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other
conditions above those indicated in the operational sections of
this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect reliability.
DC Power Supply Characteristics
Paramenter
Description
VDD
VSS
Positive Power Supply
Negative Power Supply
Min.
3.0
1.5
Max.
3.6
1.6
Units
V
V
DC Electrical Characteristics for Switching over Operating Range (TA = –40°C to +85°C)
Paramenter
Description
Test Conditions(1)
Min.
Typ.(2)
Max.
VIH(3)
Input HIGH Voltage Guaranteed HIGH level 0.65(VDD-VSS)+VSS
VIL(3)
Input LOW Voltage Guaranteed LOW level
–0.5+VSS
0.35(VDD-VSS)+VSS
VDD = Max.,
VIK
Clamp Diode Voltage IIN = –18mA
–0.7+VSS
–1.2+VSS
IIH
Input HIGH Current VDD = Max., VIN = VDD
±5
IIL
Input LOW Current VDD = Max., VIN = VSS
±5
Units
V
µA
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at TA = 25°C ambient and maximum loading.
3. VIH + VIL are for SEL input only.
06-0085
3
PS8841
06/06/06
 ▷