English
Language : 

PI3CH400 Datasheet, PDF (3/8 Pages) Pericom Semiconductor Corporation – Low Voltage, 5Ω, 4-Channel 2-Port NanoSwitch™
◁
PI3CH400
Low Voltage, 5Ω, 4-Channel
2-Port NanoSwitch™
DC Electrical Characteristics, 2.5V Supply (Over Operating Range, TA = –40°C to +85°C, VCC = 2.5V ± 10%)
Parameters(4)
Description
Test Conditions(1)
Min. Typ.(2) Max.
Units
VIH
Input HIGH Voltage
Guaranteed Logic HIGH Level
1.8
VCC + 0.3
VIL
Inout LOW Voltage
Guaranteed Logic LOW Level
–0.3
0.8
V
VIK
Clamp Diode Voltage
VCC = Max., IIN = –6mA
–0.7
–1.8
IIH
Input HIGH Current
VCC = Max., VIN = VCC
±1
IIL
Input LOW Current
VCC = Max., VIN = GND
±1
µA
IOZH
High Impedance Current
0 ≤ A, B ≤ VCC
±1
VCC = Min., VIN = 0V,
RON
Switch On-Resistance(3)
ION = –48mA
VCC = Min., VIN = 2.25V,
ION = –15mA
4
8
Ω
7
14
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3V, TA = 25°C ambient and maximum loading.
3. Measured by the voltage drop between A and B pin at indicated current through the switch. On-Resistance is determined
by the lower of the voltages on the two (A,B) pins.
4. This parameter is determined by device characterization but is not production tested.
Capacitance (TA = 25°C f = 1 MHz)
Parameters(1)
Description
Test Conditions
CIN
Input Capacitance
COFF
A/B Capacitance, Switch Off
VIN = 0V
CON
A/B Capacitance, Switch On
Notes:
1. This parameter is determined by device characterization but is not production tested.
Typ.
Units
1.8
3.0
pF
6.4
Power Supply Characteristics
Parameters
Description
Test Conditions(1)
Min. Typ.(2)
ICC
Quiescent Power Supply Current VCC = 3.6V, VIN = GND or VCC
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at VCC = 3.3V, +25°C ambient.
Max.
0.8
Units
mA
06-0247
3
PS8722C
05/10/06
 ▷