PI6C2401 Datasheet, PDF (2/4 Pages) Pericom Semiconductor Corporation – Phase-Locked Loop Clock Driver

PI6C2401
112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122^P1122^h3344^a55^s66^e7788^-99^L0011^o2233^c44^k5566^e77^d8899^L0011^o2233^o44^p556677^C8899^l00^o11^c2211^k2233^D4455^r6677^iv8899^e00^r1122
Pin Functions
Pin Name
Pin Number
CLK_IN
1
AV_CC
2
AGND
3
CLK_OUT
4
S
5
GND
6
V_CC
7
FB_IN
8
Type
I
Power
Ground
O
I
Ground
Power
I
Description
Reference Clock input. CLK_IN allows spread spectrum clock input.
Analog power supply.
Analog ground.
Clock outputs. The output provides low-skew copies of CLK_IN
and has an embedded series-damping resistor.
Control Input S. S is used to bypass the PLL for test purposes.
When S is strapped to ground, PLL is bypassed and CLK_IN
is buffered directly to the device outputs.
Ground.
Power supply.
Feedback input. FB_IN provides the feedback signal to the internal PLL.
DC Specifications (Absolute maximum ratings over operating free-air temperature range)
Symbol
Parameter
Min.
Max. Units
V_I
Input voltage range
V_O
Output voltage range
V_CC + 0.5
−0.5
V
VI_{_}DC DC input voltage
+5.0
IO_{_}DC DC output current
100
mA
Power
Maximum power dissipation at T_A= 55^oC in still air
1.0
W
T_STG
Storage temperature
-65
150
o_C
Note: Stress beyond those listed under “absolute maximum ratings” may cause permanent damage to the device.
Parameter
Test Conditions
V_CC
Min.
Typ.
I_CC
V_I = V_CC or GND; I_O = 0⁽¹⁾
3.6V
C_I
V_I = V_CC or GND
4
3.3V
C_O
V_O = V_CC or GND
6
Note:
1. Continuous output current
Max.
10
Units
µA
pF
2
PS8419C
01/12/05