PI3B16245 Datasheet, PDF (2/3 Pages) Pericom Semiconductor Corporation – 3.3V, 16-Bit, 2-Port NanoSwitch™

PI3B16245/PI3B162245
1234567890123456789012345678901212345678901234567890123456789012123456789012345³67^.8³9^V012^,3^H456^o7^t89^I0ⁿ12^s1^e2^r34^t5ⁱ6^o7ⁿ89^,01¹2⁶34^-5^B67ⁱ8^t9^,0²12^-3^P45^o6^r78^t90^B12^u1^s23^S4^w567ⁱ8^t9^c0^h12
Maximum Ratings
(Above which the useful life may be impaired. For user guidelines, not tested.)
Storage Temperature ....................................................... –65°C to +150°C
Ambient Temperature with Power Applied ........................ –0°C to +85°C
Supply Voltage Range ........................................................ –0.5V to +4.6V
DC Input Voltage ............................................................... –0.5V to +4.6V
DC Output Current ......................................................................... 120 mA
Power Dissipation ............................................................................... 0.5W
Note:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device.
This is a stress rating only and functional operation of the
device at these or any other conditions above those indi-
cated in the operational sections of this specification is not
implied. Exposure to absolute maximum rating condi-
tions for extended periods may affect reliability.
DC Electrical Characteristics (Over the Operating Range, T_A = –40°C to +85°C, V_CC = 3.0V to 3.6V)
Parameters Description
Test Conditions⁽¹⁾
Min. Typ⁽²⁾
V_IH
Input HIGH Voltage
Guaranteed Logic HIGH Level
2.0 —
V_IL
Input LOW Voltage
Guaranteed Logic LOW Level
–0.5 —
I_IH
Input HIGH Current
V_CC = Max., V_IN = VCC
——
I_IL
Input LOW Current
V_CC = Max., V_IN = GND
——
I_OZH
High Impedance Output Current 0 ≤ A, B ≤ V_CC
——
V_IK
Clamp Diode Voltage
R_ON
Switch On Resistance⁽³⁾
V_CC = Min., I_IN = –18mA
V_CC = Min., V_IN = 0.0V,
16245
— –0.7
—
5
I_ON = 48mA
162245 20 28
V_CC = Min., V_IN = 2.4V,
16245 — 10
I_ON = 15mA
162245 20 35
Max.
—
0.8
±1
±1
±1
–1.2
8
40
15
48
Units
V
V
µA
µA
µA
V
Ω
Ω
Capacitance (T_A = 25°C, f = 1 MHz)
Parameters⁽⁴⁾ Description
C_IN
C_OFF
Input Capacitance
A/B Capacitance, Switch Off
C_ON
A/B Capacitance, Switch On
Test Conditions
V_IN = 0V
V_IN = 0V
V_IN = 0V
Typ Units
3.0
pF
8.5
pF
17.0
pF
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at V_CC = 3.3V, T_A = 25°C ambient and maximum loading.
3. Measured by the voltage drop between A and B pin at indicated current through the switch. ON resistance is determined
by the lower of the voltages on the two (A,B) pins.
4. This parameter is determined by device characterization but is not production tested.
2
PS8189C 09/13/99