PI2PCIE2212ZHE Datasheet, PDF (2/6 Pages) Pericom Semiconductor Corporation – PCI Express® 2.0, 1-Lane, 2:1 Mux/DeMux Switch w/ Single Enable

PI2PCIE2212
PCI Express® 2.0, 1-Lane 2:1 Mux/DeMux Switch w/ Single Enable
Maximum Ratings
(Above which useful life may be impaired.For user guidelines, not tested.)
Storage Temperature.......................................... –65°C to +150°C
Supply Voltage to Ground Potential .................... –0.5V to +2.5V
DC Input Voltage.................................................. –0.5V to +V_DD
DC Output Current ........................................................... 120mA
Power Dissipation................................................................. 0.5W
Note: Stresses greater than those listed under MAXIMUM RATINGS
may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
Power Supply Characteristics
Parameters
Description
Test Conditions
I_CC
Quiescent PowerSupply Current
V_DD = Max., V_IN = GND or V_DD
Notes:
1. Typical values are at V_DD = 1.8V, T_a = 25°C ambient and maximum loading.
Min.
Typ.⁽¹⁾
200
Max.
400
Units
µA
DC Electrical Characteristics (T_A = –40°Cto +85°C, V_DD = 1.5V to 1.8V)
Parameter
Description
Test Conditions
Min.
Typ.⁽¹⁾
Max.
Units
V_IH
V_IL
V_IK
I_IH
I_IL
V_IDC
Input HIGH Voltage Control Input, SEL
Input LOW Voltage Control Input, SEL
Clamp Diode Voltage Control Input, SEL
Input HIGH Current Control Input, SEL
Input LOW Current Control Input, SEL
DC Signal Voltage Range, Channel I/O
(Ax, Bx, Cx)
Guaranteed HIGH level
Guaranteed LOW level
V_DD = Max., I_IN = –18mA
V_DD = Max., V_IN = V_DD
V_DD = Max., V_IN = GND
V_O/V_I > 95%, R_L =10K
V_O/V_I > 80%, R_L =50-
ohms
0.65 x V_DD
-0.5
-
-
-
-0.4
-0.3
Notes:
1. Typical values are at V_DD = 1.8V, T_a = 25°C ambient and maximum loading.
Dynamic Electrical Characteristics⁽²⁾ (T_A= -40º to +85ºC, VDD = 1.5V to 1.8V)
Parameter Description
Test Conditions
Min.
X_TALK
O_IRR
I_LOSS
Crosstalk
OFF Isolation
Differential
Insertion Loss
f = 2.5 GHz
f = 2.5 GHz
f= 2.5 GHz
BW
Bandwidth -3dB
Insertion loss 1.5 dB, V_IN = 0.6Vpp, DC = 0V
2.5
V_If
Max Signal Fre-
Insertion loss 1.5 dB, V_IN = 0.6Vpp, DC = 0.9V
2.5
quency Range
Insertion loss 3.0 dB, V_IN = 0.6Vpp, DC = 0V
4.0
Insertion loss 3.0 dB, V_IN = 0.6Vpp, DC = 0.9V
4.0
RL = 50, f = 625MHz, Sinewave, DC = 0V
1.2
P-1dB
1 dB Compression
Input Signal
RL = 50, f = 625MHz, Sinewave, DC = 0.45V
2.0
RL = 50, f = 625MHz, Sinewave, DC = 0.9V
2.4
Notes:
1. Typical values are at V_DD = 1.8V, T_a = 25°C ambient and maximum loading.
2. Guaranteed by design.
-
-
-0.7
-
-
Typ.⁽¹⁾
-38
-25
-2.0
3.8
-
0.35 x V_DD V
-1.2
±5
μA
±5
2.4
V
2.0
Max. Units
dB
GHz
Vpp
13-0023
2
PS8971B
02/08/13