PI3V724 Datasheet, PDF (12/14 Pages) Pericom Semiconductor Corporation – 1 to 2 VGA Demux

PI3V724
1 to 2 VGA Demux
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
VDD (Power Supply)……………………………………..………3.0V to 3.6V
VDD5_IN(Power Supply)……………………………………….4.5V to 5.5V
Operating Ambient Temperature………………………….40^oC to +85^oC
Storage Temperature………………………………………-55^oC to +150^oC
Note: Stresses greater than those listed under MAXIMUM RAT-
INGS may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or any
other conditions above those indicated in the operational sections
of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect reliability.
DC ElectricalCharacteristics for Video Switching over Operating Range
(TA= –40°C to +85°C,VDD = 3.3V±10% ,VDD5_IN = 5V)
Parameters Description
Test Conditions(1)
Min. Typ.(2) Max.
VIH
Input HIGH Voltage (SEL/Priority and
MS pins)
Guaranteed HIGH level
2
-
-
VIL
Input LOWVoltage (SEL/Priority, and
MS pins)
Guaranteed LOW level
–0.5 -
0.8
VIK
IIH
IIL
I_{OFF_H/V}
IOFF_DDC
Clamp Diode Voltage
VDD = Max., ISELx = –18mA -
Input HIGH Current (SEL/Priority)
VDD = Max., VSELx = VDD
-
Input LOW Current (SEL/Priority)
VDD = Max., VSELx = GND
-
Power Down Leakage Current for H/V
channels only
VDD = 0V, VB = 0V, VA ≤ 3.6
-
Power Down Leakage Current for DDC
channels only
VDD = 0V, VB = 0V, VA ≤ 3.6
-
–0.8
–1.2
-
±5
-
±5
-
22
-
±5
IOZ (DDC and
switch leakage when switch is off
VDD = 3.6V, CE/ = High, Vinput
±5
RGB path)
= 0V to Vdd
RON_RGB
Switch On-Resistance for RGB path (3)
VDD = Min., 0V ≤ Vinput ≤
1.2V, Iinput = –40mA
-
4.8
5.6
RFLAT(ON)
On-Resistance Flatness for RGB path (4)
VDD = Min., Vinput @ 0V and
1.2V, Iinput = –40mA
-
0.5
+1
∆RON
On-Resistance match from center ports V_DD = Min., 0V ≤ Vinput ≤
to any other port (RGB path only)(4) 1.2V, Iinput = –40mA
-
0.1
1
VOH (H/V)
Output high for H1_out/V1_out signals V_DD5 = 5V, I_OH = -24mA
3.0
VDD5
V_OL(H/V)
Output low for H1_out/V1_out signals V_DD5 = 5V, I_OL = 24mA
0
0.8
Vdd = min, Vinput = >2V
Vout_DDC DDC switch path ouput voltage
(either side, since DDC path is
2
bi-directional).
Units
V
V
V
µA
µA
mA
mA
µA
Ω
Ω
Ω
V
V
V
14-0168
12
www.pericom.com 10/22/14