YK-3.3V Datasheet, PDF (1/4 Pages) Pericom Semiconductor Corporation – 3.3V CMOS Ultra Low Jitter VCXO

ADVANCED INFORMATION
YK Series Voltage Controlled Crystal Oscillator (VCXO)
3.3V CMOS Ultra Low Jitter VCXO
3.2 x 2.5mm
YK
3.2 x 2.5mm Ceramic SMD
Product Features
• 1 - 32MHz Frequency Range
• Cost-effective design
• Commercial and industrial operation
• ±50 ppm stability (or as specified)
• ±50 to ±100 ppm absolute (net) pull range
• RoHS Compliant
Package:
3.2±0.1
PIN 1
2.5±0.1
Recommended Land Pattern:
Product Description
The YK is a voltage controlled crystal oscillator
with wide pullability over a broad range of
operating conditions and frequencies. The
device is constructed with a hermetically sealed,
quartz crystal resonator and low noise clock
IC. The device, available on tape and reel, is
contained in a 3.2 x 2.5mm ceramic package.
Applications
The YK Series VCXO is an ideal component in
phase locked loop circuits that perform clock
smoothing, clock/data recovery, or frequency
translation and card synchronization functions,
such as:
• SD/HD Video decoding
• SONET/SDH timing control and line cards
• T3/E3 Platforms
• Satellite and microwave communications
• Wireless base stations
• xDSL and DSLAM
• VoIP
1.0±0.15
0.9
0.6
#1 #2
#4 #3
0.10
1.6
2.1
(Bottom View)
Pin Functions:
Pin
Function
1
Voltage Control
2
Ground
3
Output
4
V_CC
Part Ordering Information:
YK XXX YYYY
A: ProductFamily
B: XXX = FrequencyCode
C: YYYY = SpecificationCode
Following the above format, Saronix-eCera part numbers will be assigned upon
confirmation of exact customer requirements.
SaRonix-eCera™ is a Pericom® Semiconductor company • US: [phone] TW: [phone] • www.saronix-ecera.com
All specifications are subject to change without notice. YK 3.3V REV2008_DEC04_01.3
1