English
Language : 

PT7M7436 Datasheet, PDF (1/6 Pages) Pericom Semiconductor Corporation – Supervisory Circuit
GND 3
GND 3
2 BATT
2 BATT
PT7M7436/37/38
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||S||||O|||||T|||||2|||3||||-||5||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||||||||||||||||||
PT7M7430xx
PT7M7431xx
PPTS7Mu7p43e2rxxvisory Circuit
Features
1 GND LBOL D5 escription
1 GND LBOL 5
 User-Adjustable Low/High Thresholds with The PT7M7436/37/38 are dual-level battery monitors
585mV/615mV Internal Reference
 Low Current (1.5μA typ)
2 NC
with internal hysteresis. These devices are offered with
2 NC
dual low-battery output indicators which can be used to
 Dual Low-Battery Outputs
3 LBOH BATT i4ndicate three battery3 coLnBdOiHtionBsA:TgToo4d (operate system
 Push-Pull active low, Open-Drain active low and in normal mode), weak (operate system in low-power
Open-Drain active high output options
mode), or empty (disable the system).
 90ms Minimum LBOA/LBOL TimPeTo7uMt 7P4e3r3iod
PT7M7434
 Immune to Short Battery Voltage Transients
 -40°C to + 85°C Operating Temp1eraHtTuHrIeN RaVnCgCe 5
AppPlTi7cMat7i4o35ns
 1 MHoTnHiItNorinVgCClit5hiumion
PT7M7479H
PT7M7479L
(L1i+) HTcHells VoDrD m5ulticell
2 GND
alkaline/ NiCd/ NiMH power supplies.
2 GND
2 GND
Pin Configuration
3 LTHIN LBO 4
SOT23-6
PT7M7436
PT7M7437
1 HTHIN VCC 6
3 LTHIN LBO 4
PT7M7438
1 HTHIN VCC 6
3 LTH
RST
(/RST) 4
PT7M3806M
PT7M3806E
1 RSTSENSE HSENSE 6
2 GND LBOH 5
2 GND LBOH 5
2 GND
LSENSE 5
3 LTHIN LBOL 4
3 LTHIN LBOL 4
3 RESET
VCC 4
Pin Description
Pin
Name
1
HTHIN
2
GND
3
LTHIN
4
LBOL
/LBOL
5
LBOH
/LBOH
6
VCC
Type
I
P
I
O
O
P
Description
HTH Threshold Monitor Input. A resistor-divider network sets the high threshold
associated with LBOH/LBOH.
Ground
LTH Threshold Monitor Input. A resistor-divider network sets the low threshold
associated with LBOL/LBOL.
Low-Battery Output Low. LBOL/LBOL is asserted when LTHIN drops below VLTHIN-.
It remains asserted for at least 90ms after LTHIN rises above VLTHIN+. Push-pull output
for PT7M7436, open-drain output for PT7M7437/38.
Low-Battery Output High. LBOH/LBOH is asserted when HTHIN drops below
VHTHIN. It remains asserted for at least 90ms after HTHIN rises above VHTHIN+. Push-pull
output for PT7M7436, open-drain output for PT7M7437/38.
Supply Voltage. Device power supply.
12-07-0002
PT0212-6
07/05/12
1