|
PT7M6418 Datasheet, PDF (1/12 Pages) Pericom Semiconductor Corporation – Low Power Voltage Detector | |||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||
Features
PT7M6418 -6450 CL/CH /NL
||||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Low Power Voltage Detector
Description
ï· High accuracy: ï±2% (25°C)
The PT7M64xx series are µP supervisory circuits with
ï· Low power consumption: 0.6μA @ 3V Vcc
a minimum reset timeout period of 120ms. Each circuit
ï· Detecting voltage range: 1.8 to 5V in 100mV includes a precise bandgap reference; a comparator, a
increments
reset timeout circuit, internally trimmed resistor
ï· Operating voltage range: 1.2V ~ 5.5V
networks that set specified trip thresholds, and an
ï· Operating temperature range: -40°C to + 85°C
internal 5% threshold hysteresis circuit (see the Block
ï· Detecting voltage accuracy over temperature: ï±2.5% Diagram). Output is asserted when VCC falls below the
ï´ TYP
internal VTH- and remains asserted until VCC rises above
ï· Output configuration: N-channel open drain or CMOS VTH+ (VTH+ = VTH-Ã1.05) after a reset timeout period.
ï· Reset timeout period at least 120ms
These devices provide excellent circuit reliability and
low cost by eliminating external components and
adjustments when monitoring normal systems voltage
from +1.8V to +5V in 100mV increments. The series
are voltage detectors with a propagation delay of 35µs.
The family is available with four output stage options:
push-pull with active-low output, push-pull with active-
high output, open drain with active-low output and
bidirection port with active-low output and pushbutton
reset input. These devices specified over the -40°C to
+85°C temperature range.
Table 1. Function comparison
Item
Part No.
1 PT7M64xxCL
2 PT7M64xxCH
3 PT7M64xxNL
Reset Output
Open-Drain
Push-Pull
Active high Active low Active high Active low
-
-
-
ï
-
-
ï
-
-
ï
-
-
Reset
bi-direction
Threshold
-
1.8V to 5.0V
-
in 100mV
-
increments
12-11-0002
PT0200-11 11/01/12
1
|
▷ |