PI90LV3486 Datasheet, PDF (1/9 Pages) Pericom Semiconductor Corporation – LVDS High-Speed Differential Line Receivers

PI90LV3486/PI90LVT3486
PI90LV9637/PI90LVT9637
1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122
LVDS High-Speed Differential
Line Receivers
Features
• Signaling Rates >400Mbps (200 MHz)
• Single 3.3V Power Supply Design
• Accepts ±350mV (typical) Differential Swing
• Maximum Differential Skew of 0.35ns
• Integrated110-OhmterminationonPI90LVTxxxx
• Maximum Propagation Delay of 4.7ns
• Low Voltage TTL (LVTTL) Outputs
• Industrial Temperature Operating Range: -40°C to 85°C
• Open, Short, and Terminated Fail Safe
• Meets or Exceeds ANSI/TIA/EIA-644 LVDS Standard
• Packaging (Pb-free & Green available):
-16-Pin TSSOP (L )
-16-Pin SOIC (W)
-8-Pin SOIC (W)
-8-Pin MSOP (U)
Description
The PI90LV/LVT3486 and PI90LV/LVT9637 are differential line
receivers that use low-voltage differential signaling (LVDS) to
support data rates in excess of 400 Mbps. These products are
designed for applications requiring high-speed, low-power con-
sumption and low noise generation.
A differential input signal (350mV) is translated by the device to 3V
CMOS output level.
Applications
Applications include point-to-point and multidrop baseband data
transmission over controlled impedance media of approximately
100-ohms. The transmission media can be printed circuit board
traces, backplanes, or cables.
The PI90LV/LVT3486 and PI90LV/LVT9637, as well as companion
line drivers PI90LV/LVB3487 and PI90LV/LVB9638 provide new
alternatives to RS-232, PECL, and ECL devices for high-speed,
point-to-point interface applications.
PI90LV/LVT3486
16-Pin
W, L
PI90LV/LVT9637
8-Pin
W,U
1
PS8667A
10/04/04