PI74FCT16823T Datasheet, PDF (1/8 Pages) Pericom Semiconductor Corporation – Fast CMOS 18-Bit Registers

PI74FCT1682_P3_IT₇/1₄6_F28_C23_T/1₁6₆2H₈₂82₃3_TT
PI74FCT162823T ^{123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345617889-0B12I3T456R78E90G121I2S34T56E78R90S12}
PI74FCT162H823T
1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122
Fast CMOS
18-Bit Registers
Product Features:
Common Features:
• PI74FCT16823T and PI74FCT162823T are high-speed, low
power devices with high current drive.
• VCC =5V±10%
• Hysteresis on all inputs
• Packages available:
– 56-pin 240 mil wide plastic TSSOP (A)
– 56-pin 300 mil wide palstic SSOP (V)
PI74FCT16823T Features:
• High output drive: IOH = –32 mA; IOL = 64 mA
• Power off disable outputs permit “live insertion”
• Typical VOLP (Output Ground Bounce) < 1.0V
at VCC = 5V, TA = 25°C
PI74FCT162823T Features:
• Balanced output drivers: ±24 mA
• Reduced system switching noise
• Typical VOLP (Output Ground Bounce) < 0.6V
at VCC = 5V, TA = 25°C
PI74FCT162H823T Features:
• Bus Hold retains last active bus state during 3-state
• Eliminates the need for external pull-up resistors
Logic Block Diagram
Product Description:
Pericom Semiconductor’s PI74FCT series of logic circuits are pro-
duced in the Company’s advanced 0.6 micron CMOS technology,
achieving industry leading speed grades.
The PI74FCT16823T, PI74FCT162823T and PI74FCT162H823
are 18-bit wide registers with clock enable (xCLKEN) and clear
(xCLR) controls that make these devices especially suitable for
parity bus interfacing in high-performance systems. The devices
can be operated as two 9-bit registers or one 18-bit register using the
control inputs. Signal pins are arranged in a flow-through
organization for ease of layout and hysteresis is designed into all
inputs to improve noise margin.
The PI74FCT16823T output buffers are designed with a Power-
Off disable function allowing “live insertion” of boards when the
devices are used as backplane drives.
The PI74FCT162823T has ±24 mA balanced output drivers. It is
designed with current limiting resistors at its outputs to control the
output edge rate resulting in lower ground bounce and undershoot.
This eliminates the need for external terminating resistors for most
interface applications.
The PI74FCT162H823T has “Bus Hold” which retains the input’s
last state whenever the input goes to high-impedance preventing
“floating” inputs and eliminating the need for pull-up/down resistors.
1OE
1CLR
1CLK
1CLKEN
2OE
2CLR
2CLK
2CLKEN
R
C
D
1Q1
R
C
D
2Q1
1D1
2D1
To 8 other channels
To 8 other channels
1
PS2040A 03/11/96