|
PI74ALVTC16241 Datasheet, PDF (1/8 Pages) Pericom Semiconductor Corporation – 16-Bit Buffer/Driver with 3-State Outputs | |||
|
PI74ALVTC16241 1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122
16-Bit Buffer/Driver
with 3-State Outputs
Product Features
 PI74ALVTC family is designed for low voltage operation,
VDD = 1.8V to 3.6V
 Supports Live Insertion
 3.6V I/O Tolerant Inputs and Outputs
 Bus Hold
 High Drive, -32/64mA @ 3.3V
 Uses patented noise reduction circuitry
 Power-off high impedance inputs and outputs
 Industrial operation at Â40°C to +85°C
 Packages available:
 48-pin 240 mil wide plastic TSSOP (A)
 48-pin 173 mil wide plastic TVSOP (K)
 48-pin 300 mil wide plastic SSOP (V)
Logic Block Diagram
Product Description
Pericom Semiconductorâs PI74ALVTC series of logic circuits are
produced in the Companyâs advanced 0.35 micron CMOS
technology, achieving industry leading speed.
The PI74ALVTC16241 buffer/driver is designed specifically to
improve both the performance and density of 3-state memory
address drivers, clock drivers, and bus-oriented receivers and
transmitters.
The device can be used as four 4-bit buffers, two 8-bit buffers, or one
16-bit buffer. It provides true outputs and complementary active-
low output-enable (OE and OE) inputs.
To ensure the high-impedance state during power up or power
down, OE should be tied to Vdd through a pullup resistor; the
minimum value of the resistor is determined by the current-sinking
capability of the driver.
The family offers both I/O Tolerant, which allows it to operate in
mixed 1.8/3.6V systems, and ÂBus Hold, which retains the data
inputÂs last state whenever the data input goes to high-impedance,
preventing Âfloating inputs and eliminating the need for pullup/
down resistors.
1
PS8358A 11/23/98
|
▷ |