PI6C2405A Datasheet, PDF (1/7 Pages) Pericom Semiconductor Corporation – Zero-Delay Clock Buffer

PI6C2405A
Zero-Delay Clock Buffer
Features
• Maximum rated frequency: 133 MHz
• Low cycle-to-cycle jitter
• Input to output delay, less than 300ps
• Internal feedback allows outputs to be synchronized
to the clock input
• 5V tolerant input*
• Spread spectrum clock ready
• Operates at 3.3V V_DD
• Packaging (Pb-free & Green available):
-8-pin, 150-mil SOIC (W)
-8-pin, 173-mil TSSOP (L)
Description
The PI6C2405A is a PLL based, zero-delay buffer, with the ability
to distribute five outputs of up to 133MHz at 3.3V. All the outputs
are distributed from a single clock input CLKIN and output OUT0
performs zero delay by connecting a feedback to PLL.
An internal feedback on OUT0 is used to synchronize the out-
puts to the input; the relationship between loading of this signal
and the outputs determines the input-output delay. PI6C2405A
is able to track spread spectrum clocking for EMI reduction.
PI6C2405A is characterized for both commercial and industrial
operation.
PI6C2405A-1H is a high-drive version of PI6C2405A-1
* CLKIN must reference the same voltage thresholds for the PLL to
deliver zero delay skewing
Block Diagram
Pin Configuration
PLL
CLKIN
PI6C2405A(–1, –1H)
OUT₀
OUT₁
OUT₂
OUT₃
OUT₄
CLKIN 1
OUT₂ 2
OUT₁ 3
GND ⁴
8 OUT₀
7 OUT₄
6 V_DD
5 OUT₃
Pin Description
Pin
Signal
1
CLKIN
2, 3, 5, 7
OUT[1-4]
4
GND
6
V_DD
8
OUT0
Description
Input clock reference frequency (weak pull-down)
Clock Outputs
Ground
3.3V Supply
Clockoutput, internal PLL feedback (weak pull-down)
1
PS8592D
09/22/04