PI6C10806 Datasheet, PDF (1/7 Pages) Pericom Semiconductor Corporation – 1.8V/2.5V, 250MHz, Low Skew 1:6 Crystal to LVCMOS Clock Buffer

PI6C10806
1.8V/2.5V, 250MHz, Low Skew 1:6 Crystal to LVCMOS Clock Buffer
Features
• Six low skew outputs: < 80ps
• Crystal oscillator input: 10MHz to 40MHz
• Switching frequency up to 250 MHz
• Fast output rise/fall time: < 800ps
• Synchronous output enables
• Industrial Temperature range: –40°C to +85°C
• 1.8V and 2.5V operation
• Packaging (Pb-free & Green available):
– 16-pin 173-mil wide TSSOP (L)
Description
Pericom Semiconductor’s PI6C10806 is a low skew six output
crystal oscillator driver. Crystal oscillator input range is from
10MHz to 40MHz. If XTAL_IN is driven with a signal source,
then the input frequency can be as high as 250MHz. PI6C10806,
the outputs are configured into 2 groups: a five output and a single
output; each with independent output enable.
PI6C10806 has a wide range of operating voltages: 1.8V and 2.5V.
This feature paired with the low output-to-output and part-to-part
skew makes the device ideal for low voltage, low power, high
frequency single ended applications; such as networking
Block Diagram
XTAL_IN
XTAL_OUT
ENABLE1
ENABLE2
Sync
Sync
Pin Configuration
5
BCLK[0:4]
BCLK5
XTAL_OUT 1
ENABLE2 2
GND 3
BCLK0 4
VDDO 5
BCLK1 6
GND 7
BCLK2 8
16 XTAL_IN
15 ENABLE1
14 BCLK5
13 VDDO
12 ^BCLK4
11 GND
10 BCLK3
9 VDD
Pin Description
Pin Name
ENABLE1,
ENABLE2
XTAL_IN
XTAL_OUT
BCLK[0:5]
GND
V_DD
V_DDO
Description
Active High Output Enable Inputs
Crystal interface
Crystal interface
Clock Outputs
Ground
Core Power
Output Power
07-0112
Truth Table⁽¹⁾
Inputs
Outputs
ENABLE1 ENABLE2 BCLK[0:4] BCLK5
L
L
L
L
L
H
L
Switching
H
L
Switching
L
H
H
Switching Switching
Note:
1.
H = High Voltage Level, L = Low Voltage Level
PS8823B 04/27/07
1