|
PI5USB2544A Datasheet, PDF (1/31 Pages) Pericom Semiconductor Corporation – USB Charging Port Controller and Load Detection Power Switch | |||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PI5USB2544A, PI5USB2546A
USB Charging Port Controller and Load Detection Power Switch
Features
ï¨ Two separate current limiting channels
ï¨ Supports CDP/DCP Modes per USB Battery Charging
Specification 1.2
ï¨ Supports Shorted Mode per Chinese Telecommunication
Industry Standard YD/T1591-2009
ï¨ Supports non-BC1.2 Charging Modes by Automatic
Selection
ï· Divider-1A mode
ï· Divider-2A mode
ï· Divider-2.4A mode
ï· DCP-1.2V mode
ï¨ Supports Sleep-Mode Charging and Mouse/Keyboard
Wake up
ï¨ Automatic SDP/CDP Switching for Devices that do not
request for the CDP Ports
ï¨ Load Detection for Power Supply Control in S4/S5
Charging and Port Power Management in all Charge
Modes
ï¨ Compatible with USB 2.0/3.0 Power Switch requirements
ï¨ Integrated 73-m⦠(Typ.) High-Side MOSFET
ï¨ Adjustable Current-Limit up to 3A(Typ.)
ï¨ Operating Range:4.5V to 5.5V
ï¨ Max Device Current
ï· 2μA at Device Disabled
ï· 270μA at Device Enabled
ï¨ Device Package: TQFN 3.0x3.0-16L
Description
The PI5USB2544A/2546A series is a USB charging port
controller and power switch with an integrated USB 2.0 high-
speed data line (D+/Dâ) switch. PI5USB2544A/2546A
provides the electrical signatures on D+/Dâ to support
charging schemes listed under device feature section. This
series is compatible with both popular BC1.2 compliant and
non-BC1.2 compliant devices.
System wake up (from S3) with a mouse/keyboard (both low
speed and full speed) is fully supported in the
PI5USB2544A/2546A. Additionally, PI5USB2546A
supports two distinct power management features, namely,
power wake and port power management (PPM) through
/STATUS pin. Power wake allows for power supply control
in S4/S5 charging and PPM manages port power in a multi-
port application.
The PI5USB2544A/2546A series 73-mΩ power-distribution
switch is intended for applications where heavy capacitive
loads and short-circuits are likely to be encountered. Two
programmable current thresholds provide flexibility for
setting current limits and load detect thresholds
Applications
ï¨ USB Ports (Host and Hubs)
ï¨ Notebook and Desktop PCs
ï¨ Universal Wall Charging Adapters
Pin Configuration (TQFN-16L, ZH)
2015-08-0012
PI5USB2544A
PI5USB2546A
PT0513-3 8/31/15
1
|
▷ |