PI5C3306 Datasheet, PDF (1/3 Pages) Pericom Semiconductor Corporation – 2-Bit Bus Switch with Active Low Enables

PI5C3306 _{1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122}
2-Bit Bus Switch with
Active Low Enables
Product Features
• Near zero propagation delay
• 5-Ohm switches connect inputs to outputs
• Direct bus connection when switches are ON
• Ultra Low Quiescent Power (0.2µA Typical)
– Ideally suited for notebook applications
• Packages available:
– 8-pin 173 mil wide plastic TSSOP (L)
– 8-pin 118 mil wide plastic MSOP (U)
Product Description
Pericom Semiconductor’s PI5C series of logic circuits are produced
using the Company’s advanced submicron CMOS technology,
achieving industry leading speed grades.
The PI5C3306 is a 2-bit bus switch designed with two 5-ohm bus
switches with fast individual enables. When enabled via the
associated Bus Enable (BE) pin, the “A” pin is directly connected to
the “B” pin for that particular gate. The bus switch introduces no
additional propagation delay or additional ground bounce noise.
The PI5C3306 device has active LOW enables.
Logic Block Diagram
A1
B1
BE1
A2
B2
BE2
Product Pin Configuration
BE1 1
A1 2
B1 3
GND 4
8-Pin
L, U
8 Vcc
7 BE2
6 B2
5 A2
Product Pin Description
Pin Name
BEn
A2-A1
B2-B1
Vcc
GND
Description
Switch Enable
Bus A
Bus B
Power
Ground
Truth Table⁽¹⁾
BEn
An
Bn
Vcc
Function
X*
Hi-Z Hi-Z GND Disconnect
H
Hi-Z Hi-Z
Vcc
Disconnect
L
Bn
An
Vcc
Connect
Notes:
1. H = High Voltage Level, L = Low Voltage Level
Hi-Z = High Impedance, X = Don’t Care
*A pull-up resistor should be provided for power-up protection.
1
PS8144C 01/11/01