PI4ULS3V501 Datasheet, PDF (1/9 Pages) Pericom Semiconductor Corporation – 280Mb/s Bi-directional Level Translator for Push-Pull Applications

PI4ULS3V501
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
280Mb/s Bi-directional Level Translator for Push-Pull Applications
0Features
 0.85V to 2.7V on A Port and 1.35V to 3.6V on B
Port
 VCCA may be greater than, equal to, or less than
VCCB
 High-Speed with 280 Mb/s Guaranteed Date Rate
 30 pF Capacitive Drive Capability
 Low Bit-to-Bit Skew
 Overvoltage Tolerant Enable and I/O Pins
 Non-preferential Power-Up Sequencing
 Power-Off Protection
 Package: SOT23-6L
Applications
 Mobile Phones, PDAs
 Other Portable Devices
Pin Configuration
A
1
6 EN
GND ²
5_B
V_CCA
3
4
V_CCB
SOT23-6L(Top View)
Description
The PI4ULS3V501 is a 2-bit configurable dual-
supply autosensing bidirectional level translator that
does not require a direction control pin. The B and A
ports are designed to track two different power supply
rails, VCCB and VCCA respectively.
The PI4ULS3V501 offers the feature that the values
of the VCCB and VCCA supplies are independent.
Design flexibility is maximized because VCCA can be
set to a value either greater than or less than the VCCB
supply.
The PI4ULS3V501 has high output current
capability, which allows the translator to drive high
capacitive loads such as most high frequency EMI filters.
Another feature of the PI4ULS3V501 is that each An
and Bn channel can function as either an input or an
output.
An Output Enable (EN) input is available to reduce
the power consumption. The EN pin can be used to
disable both I/O ports by putting them in 3-state which
significantly reduces the supply current.
PI4ULS3V501 is 2 kV System-Level ESD Capable.
Pin Description
Pin Pin Type
Description
No. Name
1
A
I/O
Input/output A. Referenced to
VCCA.
2 GND GND Ground.
3
VccA
Power
A-port supply voltage.0.85V ≤
VCCA ≤ 2.7 V
4
VccB
Power
B-port supply voltage.1.35 V ≤
VCCB ≤ 3.6 V
5
B
I/O
Input/output B. Referenced to
VCCB
Output enable (active High). Pull
6
EN Input EN low to place all outputs in 3-
state mode.
2013-12-0005
PT0501 01/15/14
1