PI4IOE5V9570 Datasheet, PDF (1/11 Pages) Pericom Semiconductor Corporation – 4-bit general purpose outputs

||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PI4IOE5V9570
4-bit general purpose outputs for 1MHz I²C bus
Features
 Operation power supply voltage from 2.3V to 5.5V
 4-bit I²C-bus GPO
 1 MHz I²C-bus interface with 30 mA SDA sink
capability for 4000pF
 Latched outputs with 25mA capability for directly
driving LEDs
 Software Reset; Power-on reset
 Low standby current
 ESD protection (4KV HBM and 1KV CDM)
 Offered in two different packages:UQFN 1.6x1.6-
8,MSOP-8
Pin Configuration
Description
The PI4IOE5V9570 is a CMOS device that
provides 4bits of General Purpose parallel Output
(GPO) expansion in low voltage processor and
handheld battery powered mobile applications. It
operates at 1 MHz I²C-bus speeds while maintaining
backward compatibility to Fast-mode (400 kHz) and
Standard-mode (100 kHz).
The PI4IOE5V9570 is a streamlined GPO that
consists of 4-bit push-pull outputs that offer low
current consumption, small packaging options The
PI4IOE5V9570 output expander provides a simple
solution when additional outputs are needed while
keeping interconnections and floor space to a
minimum, for example, in battery powered mobile
applications where PCBs are crowded for interfacing
to sensors, push buttons, etc.
The PI4IOE5V9570 contains an internal Power-On
Reset (POR) and a Software Reset feature that
initializes the device to its default state.
Figure1 : MSOP-8
Figure2 : UQFN 1.6x1.6-8
2015-07-0044
PT0559
08/05/15
1