PI3EQX1002B Datasheet, PDF (1/1 Pages) Pericom Semiconductor Corporation – 1-Port USB3.1 GEN-2 ReDriver

N^N_Pe_r^Ew_o^W_dP_ucr^P_to^R_Dd^Ou_atc_a^Dt_bB^U_rir_e^Cie_f^Tf ^BRIEF
SIGNAL INTEGRITY SOLUTIONS
PI3EQX1002B
1-Port USB3.1 GEN-2 ReDriver
Pericom Semiconductor’s PI3EQX1002B is a low power,
high performance 10.0 Gbps 1-Port USB 3.1 linear
ReDriver™ designed specifically for the USB 3.1 protocol.
The device provides programmable equalization, linear
swing and flat gain to optimize performance over a variety
of physical mediums by reducing Inter-Symbol Interference.
PI3EQX1002B supports two 100Ω Differential CML data
I/O’s between the Protocol ASIC to a switch fabric, over cable,
or to extend the signals across other distant data pathways on
the user’s platform.
The integrated equalization circuitry provides flexibility with
signal integrity of the signal before the ReDriver. Each channel
operates fully independently. The channels’ input signal level
determines whether the output is active.
The PI3EQX1002B also includes an automatic receiver detect
function. The receiver detection loop will be active again if the
corresponding channel’s signal detector is idle for longer than
7.3mS. The channel will then move to Unplug Mode if load
not detected, or it will return to Low Power Mode (Slumber
Mode) due to inactivity.
Features
¼¼ 5 & 10Gbps serial link with linear equalizer.
¼¼ USB3.1 and USB3.0 Compatible
¼¼ Full Compliancy to USB3.1 Super Speed
Standard
¼¼ Two 10Gbps differential signal pairs
¼¼ Pin Adjustable Receiver Equalization
¼¼ Pin Adjustable output linear swing
¼¼ Pin Adjustable Flat Gain
¼¼ 100Ω Differential CML I/O’s
¼¼ Automatic Receiver Detect
¼¼ Auto "Slumber" mode for adaptive power
management
¼¼ Single Supply Voltage: 3.3V
Application Diagram
Pericom
USB 3.1
ReDriver
Notebook
PC Monitor
Pericom
USB 3.1
ReDriver
Smart Phone
External Storage
USB 3.0 DCaebvliece
Tablet PC
www.pericom.com | 1-408-232-9100