PI3CH1012 Datasheet, PDF (1/7 Pages) Pericom Semiconductor Corporation – 10-Bit Bus Switch, 2-Enable High and Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug

PI3CH1012
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10-Bit Bus Switch, 2-Enable High and Low
1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug
Features
Description
 Near-Zero propagation delay
 5-ohm switches connect inputs to outputs
 High signal passing bandwidth (500 MHz)
 Beyond Rail-to-Rail switching
- 0 to 5V switching with 3.3V power supply
- 0 to 3.3V switching with 2.5V power supply
 5V I/O tolerant with supply in OFF and ON state
 1.8V, 2.5V and 3.3V supply voltage operation
 Hot Insertion Capable
 Industrial Operating Temperature: -40ºC to +85ºC
 8kV ESD Protection (human body model)
 Latch-up Performance: >200mA per JESD17
 Packaging (Pb-free & Green available):
-24-pin 150-mil wide plastic QSOP (Q)
Pin Configuration
The PI3CH1012 is a Low-voltage, 10-channel
switch designed with fast dual enables. The switch
creates no additional ground bounce noise or
propagation delay.
The PI3CH1012 device is very useful in switching
signals that have high bandwidth (500 MHz).
Applications
 High Bandwidth Data Switching
 Hot-Docking
 Analog Signal Switching
 Differential Signal Switching
Pin Description
Pin No
1, 23
2-11
13-22
12
24
Pin Name
1111111
EN, EN
A0-A9
B9-B0
GND
V_CC
Description
Enable
A Ports
B Ports
Ground
Power
Block Diagram
Truth Table⁽¹⁾
A0-A9 EN EN
Function
Hi-Z
LL
Disconnect
Hi-Z
LH
Disconnect
B0-B9 H L
Connect
Hi-Z
Note:
HH
Disconnect
1. H=High Voltage Level; L=Low Voltage Level
Hi-Z= High Impedance.
2015-07-0011
PT0466-3
08/05/15
1