PI3CH1010 Datasheet, PDF (1/6 Pages) Pericom Semiconductor Corporation – 10-Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug

PI3CH1010
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10-Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V,
High-Bandwidth, Hot Plug
Features
Description
 Near-Zero propagation delay
 5-ohm switches connect inputs to outputs
 High signal passing bandwidth (500 MHz)
 Beyond Rail-to-Rail switching
- 0 to 5V switching with 3.3V power supply
- 0 to 3.3V switching with 2.5V power supply
 5V I/O tolerant with supply in OFF and ON state
 1.8V, 2.5V and 3.3V supply voltage operation
 Hot Insertion Capable
 Industrial Operating Temperature: -40ºC to +85ºC
 8kV ESD Protection (human body model)
 Latch-up Performance: >250mA per JESD17
 Packaging (Pb-free & Green available):
-24-pin 173-mil wide plastic TSSOP (L)
The PI3CH1010 is a 10-channel switch designed with
a fast enable. The switch introduces no additional ground
bounce noise or propagation delay.
The PI3CH1010 device is very useful in switching
signals that have high bandwidth (500 MHz).
Applications
 High Bandwidth Data Switching
 Hot-Docking
 Analog Signal Switching
 Differential Signal Switching
Block Diagram
Pin Configuration
Pin Description
Pin No
23
2-11
13-22
24
12
1
Pin Name
1111111
EN
A0-A9
B9-B0
V_CC
GND
NC
2015-07-0015
Description
Switch Enables
A Ports
B Ports
Power
Ground
Not connected
Truth Table⁽¹⁾
EN
A0-A9
Function
H
Hi-Z
Disconnect
L
B0-B9
Connect
Note:
1. H=High Voltage Level; L=Low Voltage Level;
Hi-Z=High Impedance
PT0470-3 08/05/15
1