|
PI2EQX862 Datasheet, PDF (1/1 Pages) Pericom Semiconductor Corporation – PCIe 3.0/SATA3.0, 1-Lane, Combo ReDriver | |||
|
NNePwrEoWdPurcoPtdRDuOacttaDBbUrriieeCffT BRIEF
SIGNAL INTEGRITY SOLUTIONS
PI2EQX862
PCIe 3.0/SATA3.0, 1-Lane, Combo ReDriverâ¢
Description
Pericomâs PI2EQX862 is a low power, cost effective 8.0/6.0Gbps
ReDriver designed as a cost effective PCIe 3.0 and/or SATA 3.0
1-Lane solution. The device provides programmable equaliza-
tion and De-Emphasis to optimize performance over a variety of
physical mediums by reducing Inter-Symbol Interference.
PI2EQX862 supports two 100⦠Differential CML data I/Oâs be-
tween the Protocol ASIC to a switch fabric, over cable, or to ex-
tend the signals across other distant data pathways on the userâs
platform.
The integrated equalization circuitry provides flexibility with sig-
nal integrity of the signal before the ReDriver. A low-level input
signal detection and output squelch function is provided for each
channel. Each channel operates fully independently. The chan-
nelsâ input signal level (on xI+/-) determines whether the output
is active. If the input signal level of the channel falls below the
active threshold level (Vth-) then the outputs are driven to the
common mode voltage.
The PI2EQX862 also includes an automatic receiver detect func-
tion. The receiver detection loop will be active again if the corre-
sponding channelâs signal detector is idle for longer than 7.3mS.
The channel will then move to Unplug Mode if load not detected, or
it will return to Low Power Mode (Slumber Mode) due to inactivity.
Block Diagram
Signal Detection
CML
XI+
XIâ
Equalizer
Limiting
Amp
EQ_x
- Repeated 2 times -
CM L
XO+
XOâ
Features
ÃÃPCIe 3.0 and SATA 3.0 compatible
ÃÃTwo 8.0/6.0Gbps differential signal pairs
ÃÃAdjustable Receiver Equalization
ÃÃ100⦠Differential CML I/Oâs
ÃÃPin Configured Output Emphasis Control
ÃÃInput signal level detect and squelch for
each channel
ÃÃAutomatic Receiver Detect
ÃÃLow Power : ~7mW Unplug Mode
ÃÃAuto "Slumber" mode for adaptive power
management
ÃÃSingle Supply Voltage: 1.2V
ÃÃPackaging: 18-Pin TQFN 2 x 2 mm
Application Diagram
INTERNAL PLATFORM OPTIONS Combo ReDriver: PI2EQX862
Combo
SSD
M.2 Internal
PCIe 3.0/
SATA 3.0
Connector
PI2EQX862
I/O Port I/O HUB
To
PCIe 3.0/ SATA 3.0
CPU
HDD
Combo ReDriver
SATA
Express
Port
EXTERNAL SATA EXPRESS PORT
SATA Express 8Gb
PI2EQX862
PCIe 3.0/ SATA 3.0
SATA Express
8Gb Port
Notebook
Combo ReDriver
Notebook PC
Power
Management
www.pericom.com | 1-408-232-9100
|