|
PI2EQX502E Datasheet, PDF (1/1 Pages) Pericom Semiconductor Corporation – 1.8V 5.0Gbps, 1-port (2-Channel) USB3.0 ReDriver | |||
|
NPerwodPurcotdDuacttaBbrriieeff
PI2EQX502E
1.8V 5.0Gbps, 1-port (2-Channel) USB3.0 ReDriverâ¢
Pericom Semiconductorâs PI2EQX502E is a low power, high
performance 5.0 Gbps signal ReDriver⢠designed specifically
for the USB 3.0 protocol. The device provides programmable
equalization and De-Emphasis to optimize performance
over a variety of physical mediums by reducing Inter-Symbol
Interference. PI2EQX502E supports two 100⦠Differential
CML data I/Oâs between the Protocol ASIC to a switch fabric,
over cable, or to extend the signals across other distant data
pathways on the userâs platform.
The integrated equalization circuitry provides flexibility with
signal integrity of the signal before the ReDriver. A low-
level input signal detection and output squelch function
is provided for each channel. Each channel operates fully
independently. The channelsâ input signal level (on xI+/-)
determines whether the output is active. If the input signal
level of the channel falls below the active threshold level
(Vth-) then the outputs are driven to the common mode
voltage.
The PI2EQX502E also includes an automatic receiver detect
function. The receiver detection loop will be active again
if the corresponding channelâs signal detector is idle for
longer than 7.3mS. The channel will then move to Unplug
Mode if load not detected, or it will return to Low Power
Mode (Slumber Mode) due to inactivity.
Block Diagram
Signal Detection
CML
XI+
Equalizer
Limiting
Amp
XI â
EQ_x
- Repeated 2 times -
Power
Management
CML
XO+
XO â
Features
ÃÃUSB 3.0 compatible
ÃÃFull Compliancy to USB3.0 Super Speed Standard
ÃÃTwo 5.0Gbps differential signal pairs
ÃÃAdjustable Receiver Equalization
ÃÃ100⦠Differential CML I/Oâs
ÃÃPin Configured Output Emphasis Control
ÃÃProgrammable Output Swing
ÃÃInput signal level detect and squelch for each channel
ÃÃAutomatic Receiver Detect
ÃÃLow Power : 195mW ± 10%
ÃÃAuto "Slumber" mode for adaptive power
management
ÃÃSingle Supply Voltage: 1.8V
ÃÃPackaging: 16-Pin TQFN
Application Diagram
Pericom
USB3.0
ReDriver
Tablet PC
Pericom
USB3.0
ReDriver
Digital Camera Pericom
USB3.0
ReDriver
USB 3.0 Cable
USB 3.0 Cable
External
Storage
Device
Multi-function
Printer
www.pericom.com | 1-408-435-0800
|