PD10GE156 Datasheet, PDF (1/2 Pages) Pericom Semiconductor Corporation – 3.3V PECL Low Jitter 156.25MHz 10GbE XO

TM
Application Specific Crystal Oscillator 5.0 x 3.2mm
3.3V PECL Low Jitter 156.25MHz 10GbE XO _PD10GE156
5.0 x 3.2mm Ceramic SMD
ASSP XO™ for Networking
Product Features
• Very low phase jitter
• Thicker crystal for improved reliability
• Pb-free & RoHS compliant
• Industrial temperature range
Package: (Scale: none, Dimensions are in mm)
Recommended Land Pattern:
Product Description
The PD Series 3.3V, 156.25MHz crystal
clock oscillator achieves superb jitter for
10GbE applications. The output clock
signal, generated internally with a custom
oscillator design, is compatible with LVPECL
logic levels. The device, available on tape
and reel, is contained in a 5.0 x 3.2mm
surface-mount ceramic package.
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
Pin Functions:
Pin
Function
1
OE Function
2
N/C
3
V_EE
4
OUT
Applications
• 10 Gigabit Ethernet Network Interface Card
(NIC)
5
OUT
6
V_CC
• 10 Gigabit Ethernet Switch/Router
• 10 Gigabit Ethernet PHY Module
• Serial Attached iSCSI
*Extended high frequency power decoupling is recommended (see test circuit for minimum
recommendation). To ensure optimal performance, do not route RF traces beneath the CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
package.
Part Ordering Information:
PD10GE156
SaRonix-eCera™ is a Pericom® Semiconductor company • US: [phone] TW: [phone]   •   www.pericom.com
12-0053
All specifications are subject to change without notice. PD10GE156 Rev E
07/13/12 1