NX7340A01M Datasheet, PDF (1/6 Pages) Pericom Semiconductor Corporation – TYPE NX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR

TYPE NX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR
NX7340A01M
VER. B 16-Sep-14
ELECTRICAL SPECIFICATIONS
SRe Part Number : NX7340A01M
Item
Symbol
Specifications
Units
Notes
Nominal Frequency
Fo
400.000000
MHz
Frequency Stability
FT
± 50
ppm **See note
Operating Temperature Range
TR
-20 to +70
°C
Supply Voltage
V_CC
+3.3 ± 5.0%
V
Logic Type
LT
LVDS
Supply Current, Output Enabled I_CC/OE
70
Supply Current, Output Disabled I_CC/OD
40
mA Max.
mA Max.
Duty Cycle (Symmetry)
DC/SY
45 / 55
% Measured 50% of Waveform
Rise / Fall Time
T_R/T_F
400
ps Max. measured 20/80% of Waveform
Output Voltage "0" Level
Output Voltage "1" Level
V_OL
1.10 / 0.9
V_OH
1.43 / 1.6
V Typ / Min.
V Typ / Max.
Output Load
100Ω connected between outputs Output requires termination
Differential Output Voltage
V_OD
247 / 454
mV Min. / Max.
Jitter, Phase
RMS
0.9
ps Max. 12KHz ~ 20MHz Frequency Band
Jitter, Accumulated
RMS(1-σ)
6
ps Max. 20,000 Consecutive Periods
Jitter, Peak to Peak
Pk-Pk
40
ps Max. 100,000 Random Periods
Storage Temperature Range
-55 to +125
°C
※ This product doesn't include harmful substance that stipulated by SONY SS-00259 Level 1 and S-AT2-001 Level 1 standard. RoHS Compliant (Pb - Free).
**Stability includes all combinations of Operating Temperature, Load changes, rated Input (Supply) Voltage changes, Initial
Calibration Tolerance (25°C), Aging (1 years at 25°C Average Effective Ambient Temperature), Shock and Vibration.
Output Enable / Disable Function
Parameter
Input Voltage (Pin1), Output Enable
Input Voltage (Pin1), Output Disable (low power standby)
Output Disable Delay
Output Enable Delay
Start Up Time
Min. Typ. Max. Units
Notes
0.7V_CC
0.3V_CC
V Or Open
V Output is Hi-Z
100 ns
100 ns
10 ms
E0-R-4-014 Rev. E
Page 1