MN-3.3V Datasheet, PDF (1/4 Pages) Pericom Semiconductor Corporation – 3.3V CMOS SSXO

3.3V CMOS SSXO
MN Series Spread Spectrum
Crystal Oscillator (XO)
7.0 x 5.0mm
MN
Package:
2
8
Recommended Land Pattern:
2
7.0 x 5.0mm Ceramic SMD
8
Product Features
• Wide Frequency Range – 16MHz to 67MHz
• Flexible modulation rate options
• Center Spread: ±0.25% to ±1.15%
• Down Spread: –0.5% to –1.7%
• Integrated Phase-locked loop
• Output Enable with internal pull-up (default
enable)
• 3.3V CMOS compatible logic levels
• Very low power consumption
• Industry standard 7.0 x 5.0mm ceramic SMD pkg.
• Pb-Free and RoHS/Green compliant
Pin Functions:
Pin
Function
1
OE Function
2
Ground
3
Clock Output
4
V_DD
Product Description
The MN Series is used in digital electronic systems to
reduce the Electro-Magnetic Interference (EMI). The
device uses proprietary PLL and Spread-Spectrum
Clock Generator (SSCG) technology to synthesize
from and modulate the frequency of the input crystal.
Measured radiated energy at the fundamental and
harmonic frequencies are reduced to comply with
Electro Magnetic Compliance (EMC) requirement.
The internal factory setting function enables flexible
selection of output frequency, modulation rate and
spread ratios.
Note: All above dimensions in mm
Part Ordering Information:
MN 270 0001
A: Product�Family
B: XXX = Frequency�Code
C: YYYY = Specification�Code
Following the above format, Saronix-eCera part numbers will be assigned upon
confirmation of exact customer requirements.
Applications
• Multi function Printers
• Media Players
• Digital Television
• Video Surveillance
• LCD Panel
• Wired and Wireless networking devices
SaRonix-eCera™ is a Pericom® Semiconductor company • US: [phone] TW: [phone]   •   www.saronix-ecera.com
All specifications are subject to change without notice. MN 3.3 REV2008_NOV17_0.2
1