KD-1.8V Datasheet, PDF (1/2 Pages) Pericom Semiconductor Corporation – 1.8V CMOS 32.768kHz

1.8V CMOS 32.768kHz
KD Series 1.8V CMOS kHz Crystal Oscillator
5.0 x 3.2mm
KD
KN Series Real Time Clock Oscillator
7.0x5.0mm (XO)
5.0 x 3.2mm Ceramic SMD
Product Features
•32.768 kHz
•1.8V CMOS compatible logic levels
•Low power standby mode (< 10µA)
•Low power active mode (< 0.17mA typ.)
•Designed for standard reflow and washing
techniques
•Pb-free and RoHS/Green compliant
Package: (Dimensions are in mm)
Recommended Land Pattern:
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
Product Description
The KD Series is a real time clock oscillator that
achieves superb stability over a broad range
of operating conditions. The output clock
signal is compatible with LVCMOS/LVTTL logic
levels. The device, available on tape and reel,
is contained in a 5.0 x 3.2mm surface-mount
ceramic package.
Pin Functions:
Pin
Function
1
OE Function
2
Ground
3
Clock Output
4
V_DD
Applications
Real-Time Clock Oscillator
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
Part Ordering Information:
KND XXX YYYY
YYYY = Specification�Code
XXX = Frequency�Code
Product�Family
Following the above format, SaRonix-eCera part numbers will be assigned upon
confirmation of exact customer requirements.
SaRonix-eCera™ is a Pericom® Semiconductor company • US: [phone] TW: [phone]   •   www.saronix-ecera.com
11-0032
All specifications are subject to change without notice.
KD 1.8V REV A
2011_NOV 28
1