FDSAS2062 Datasheet, PDF (1/2 Pages) Pericom Semiconductor Corporation – 2.5V CMOS Low-Jitter 62.5 MHz SAS-2 XO

TM
Application Specific Crystal Oscillator 5.0 x 3.2mm
2.5V CMOS Low-Jitter 62.5 MHz SAS-2 XO _FDSAS2062
5.0 x 3.2mm Ceramic SMD
ASSP XO™ for Storage
Product Features
• Very low phase jitter - 0.5ps RMS
• Thicker crystal for improved reliability
• Low output current - 15mA max.
• Low power stand by mode
• Industrial Temperature Range
• Pb-free & RoHS compliant
Product Description
This is an enhanced high-frequency 3.3V,
62.5MHz crystal clock oscillator with superb
jitter and low operating current for Serial
Attached SCSI (SAS-1 & SAS-2) applications.
The output clock signal, generated internally
with a patented oscillator design, is
compatible with LVCMOS logic levels.
Applications
• SAS-2 Hard Disk Drive
Package:
Recommended Land Pattern:
Pin Functions:
Pin
Function
1
OE Function
2
Ground
3
Clock Output
4
V_DD
*Extended high frequency power decoupling is recommended (see test circuit for minimum
recommendation). To ensure optimal performance, do not route RF traces beneath the
package.
Part Ordering Information:
FDSAS2062
SaRonix-eCera™ is a Pericom® Semiconductor company • US: [phone] TW: [phone]   •   www.pericom.com
All specifications are subject to change without notice. FDSAS2062 Rev C
05/13/10 1